Vicrez VS Rocketbunny
#21
This is a Vicrez N3 front bumper pictured below.. polyurethane and basically as indestructible as a front bumper is going to get. It can be beaten with an aluminum bat without damaging its form.
Cons... fitment is good and some heat or time in sun will help "mold" to shape. However it comes rolled up in a tight ball almost like you can't imagine and wrapped in almost cyran-wrap type plastic for shipping. Instructions are to set in sun for 20mins to take natural shape back. I didn't have big sun the day it arrived so took solid 2 hours for full shape to develop.
The shipping process left slight wripple/wave under driver headlamp that could not be heated/shaped out. it's not very noticeable but too me of course it's annoying. We did get it to sit down under the head lamp but thereafter the first day in sun after painted and installed it popped back up.
If weight is your serious concern also don't go with the polyurethane victez its heavy compared to the fiberglass options and even the OEM ABS plastic options. It's very thick and solid once installed. This bad boy WILL NOT flap or flex at high speeds as long as you build in 2-3 proper under support arms.
All in all im happy with Vicrez and fit was good. Lots of paint prep of course. I'd buy again.
Cons... fitment is good and some heat or time in sun will help "mold" to shape. However it comes rolled up in a tight ball almost like you can't imagine and wrapped in almost cyran-wrap type plastic for shipping. Instructions are to set in sun for 20mins to take natural shape back. I didn't have big sun the day it arrived so took solid 2 hours for full shape to develop.
The shipping process left slight wripple/wave under driver headlamp that could not be heated/shaped out. it's not very noticeable but too me of course it's annoying. We did get it to sit down under the head lamp but thereafter the first day in sun after painted and installed it popped back up.
If weight is your serious concern also don't go with the polyurethane victez its heavy compared to the fiberglass options and even the OEM ABS plastic options. It's very thick and solid once installed. This bad boy WILL NOT flap or flex at high speeds as long as you build in 2-3 proper under support arms.
All in all im happy with Vicrez and fit was good. Lots of paint prep of course. I'd buy again.
#23
General & Tech Moderator
MY350Z.COM
MY350Z.COM
Thanks Trav.
Thread
Thread Starter
Forum
Replies
Last Post