Oil Cooler relocation help?!
#1
New Member
Thread Starter
Oil Cooler relocation help?!
I just tried to have the body shop install my new Astek N3R bumper, and they're putting it back together stock right now because there's an aftermarket oil cooler interfering with where the new bumper bottom support should slide. Anyone know how I should get this back to stock, where I could relocate this Mickey Mouse-ness, etc... In other words, what should I do here, easiest?? Thanks very much for all suggestions.
Last edited by whippit; 12-05-2017 at 01:38 AM.
The following users liked this post:
whippit (12-04-2017)
The following users liked this post:
whippit (12-04-2017)
The following users liked this post:
whippit (12-04-2017)
#6
New Member
Thread Starter
Thanks to every one of the repliers, due to your help I just ordered a PS cooler off Ebay with the brackets that look like they'll line up with the 2 slots in the new bumper (apparently there's 2 types of brackets, I think one's strictly for 06s that are U-shaped, either that or those are for automatics...idk, but I got the other less bent version) But it came with all the lines right to the pump.
Sincerely, thanks.
Sincerely, thanks.
Last edited by whippit; 12-05-2017 at 01:39 AM.
#7
New Member
I've boiled my steering fluid on track days so I was looking to upgrade. During my research I learned that this aftermarket unit (Derale 13200) is basically the same as the NISMO unit (49790-RSZ30US) but at much lower price. The difference between the stock and NISMO choices is only the length. The height stays the same and thus it shouldn't interfere with any bumper mounts.
The following 2 users liked this post by JMII:
Atreyu'z 350 (12-05-2017),
whippit (12-11-2017)
Trending Topics
#8
New Member
Thread Starter
I'll be selling my used stock 03 cooler with lines I just bought for $35, someone here can have it for $30 shipped to Cont US Priority.