350z motor mounts really this easy?
#1
New Member
Thread Starter
350z motor mounts really this easy?
Every car I own has solid or stiff urethane mounts. Ive not done the z due to the threads talking about dropping subframe... just dont want to spend hours on the job.
Does this video actually make it this easy? If so it looks like a 1 hour job at most feedback from you all is appreciated.
Does this video actually make it this easy? If so it looks like a 1 hour job at most feedback from you all is appreciated.
#2
New Member
NO!! not at all. Click my link in my signature. I just did my mounts and did a write-up-ish post about it. No subframe drop or motor removal.
Post 33 is where I start to begin. You can see some of the problems I ran into and how I dealt with them.
Post 33 is where I start to begin. You can see some of the problems I ran into and how I dealt with them.
Last edited by 813_350Z; 02-07-2020 at 01:10 PM.
#3
350Z-holic
iTrader: (13)
please ... everyone within the sound of my voice ... do not jack your engine up by the oil pan!
It 'can' be that easy if the four nuts come off easy...
It 'can' be that easy if the four nuts come off easy...
The following users liked this post:
zwei_the_c (02-08-2020)
#4
New Member
Thread Starter
#5
350Z-holic
iTrader: (13)
#6
New Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post