2007 Nissan 350z 02 Sensor Differences
Thread Starter
New Member
Joined: May 2020
Posts: 6
Likes: 0
From: Kelowna
2007 Nissan 350z 02 Sensor Differences
Hi guys hoping someone can help out, I have literally looked everywhere and cant seem to find any sort of information. (I have a 2007 Nissan 350z)
Long story short had a code - took it to Nissan and they said I needed a new Upstream o2 sensor in Bank 1 (code was P2A00)
I didn't want to go through Nissan for the part as I was quoted 502.00 + Tax for this job so started looking at Denso, Bosch all through Concept Z, or Z1.
Hers is where I am running into confusion!!:
Everything I read online says that from 03-04.5 or they used a 4pin 02 sensor. Anything 05-07 came with a 6pin wideband sensor. (See attached photo from Z1 Z1 Sensors )
Concept z Sells the exact same thing for 2007 but as opposed to it being a 6 pin like Z1 they are selling it as a 4 pin ( See attached photo from Concept Z Concept Z Sensors )
Why would z1 state it as 6 pin and concept z state it as a 4 pin and why do people say that the HR's come with a 6pin that are wideband sensors?
My 2007 350z came with 4 pin upstream and 4 pin downstream so this clearly does not add up. on top of it I had Nissan take my vin and they agree that it is supposed to be a 4pin sensor in my car. That leads me to believe that Nissan changed the wideband from a 6 pin down to a 4 pin and that everyone saying HR's came with a 6 pin are wrong - but cant see anything online about that
The cherry on top was me ordering the above sensor from Z1 expecting it to be a 6pin and they sent me a 4 pin.
Anyone with more insight on this would be greatly appreciate.
Long story short had a code - took it to Nissan and they said I needed a new Upstream o2 sensor in Bank 1 (code was P2A00)
I didn't want to go through Nissan for the part as I was quoted 502.00 + Tax for this job so started looking at Denso, Bosch all through Concept Z, or Z1.
Hers is where I am running into confusion!!:
Everything I read online says that from 03-04.5 or they used a 4pin 02 sensor. Anything 05-07 came with a 6pin wideband sensor. (See attached photo from Z1 Z1 Sensors )
Concept z Sells the exact same thing for 2007 but as opposed to it being a 6 pin like Z1 they are selling it as a 4 pin ( See attached photo from Concept Z Concept Z Sensors )
Why would z1 state it as 6 pin and concept z state it as a 4 pin and why do people say that the HR's come with a 6pin that are wideband sensors?
My 2007 350z came with 4 pin upstream and 4 pin downstream so this clearly does not add up. on top of it I had Nissan take my vin and they agree that it is supposed to be a 4pin sensor in my car. That leads me to believe that Nissan changed the wideband from a 6 pin down to a 4 pin and that everyone saying HR's came with a 6 pin are wrong - but cant see anything online about that
The cherry on top was me ordering the above sensor from Z1 expecting it to be a 6pin and they sent me a 4 pin.
Anyone with more insight on this would be greatly appreciate.
Last edited by Cameron Kipp; Aug 10, 2021 at 01:05 PM. Reason: Add extra info
Thread
Thread Starter
Forum
Replies
Last Post