UpRev ROM Editor - Interface Cable Only?
#1
New Member
Thread Starter
Join Date: Oct 2021
Location: NSW
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
UpRev ROM Editor - Interface Cable Only?
Hi all,
I recently downloaded the UpRev ROM Editor software off the UpRev website, as well as their "EV18B Back To Stock.OsirisROM" ROM file for my 07 HR 350z. Question is, do I need to buy the UpRev cable to flash this pre-downloaded ROM or can I use any USB-to-OSB2 cable? If not, is there a free/opensource way to revert my EV18B ECU back to stock?
Any help appreciated!
I recently downloaded the UpRev ROM Editor software off the UpRev website, as well as their "EV18B Back To Stock.OsirisROM" ROM file for my 07 HR 350z. Question is, do I need to buy the UpRev cable to flash this pre-downloaded ROM or can I use any USB-to-OSB2 cable? If not, is there a free/opensource way to revert my EV18B ECU back to stock?
Any help appreciated!
#3
Hi all,
I recently downloaded the UpRev ROM Editor software off the UpRev website, as well as their "EV18B Back To Stock.OsirisROM" ROM file for my 07 HR 350z. Question is, do I need to buy the UpRev cable to flash this pre-downloaded ROM or can I use any USB-to-OSB2 cable? If not, is there a free/opensource way to revert my EV18B ECU back to stock?
Any help appreciated!
I recently downloaded the UpRev ROM Editor software off the UpRev website, as well as their "EV18B Back To Stock.OsirisROM" ROM file for my 07 HR 350z. Question is, do I need to buy the UpRev cable to flash this pre-downloaded ROM or can I use any USB-to-OSB2 cable? If not, is there a free/opensource way to revert my EV18B ECU back to stock?
Any help appreciated!
From what I've learned because our cars use the can buss for talking to the ECU you will need to buy a cable and a dougle (OBD). Cost is very reasonable. Much less than the UpRev cable
Hope this info helps
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post