When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Im tired of them breaking as often as i take the thing off so I want to convert over. Just want to buy the right size. Anyone whos done this know size for easy install?
Last edited by Enriquez2000; 03-27-2022 at 08:27 AM.
What are you talking about the upper 6 clips?
If so what i did was buy a set of NRG m6 fasteners and they come with nutserts that do the job. Unless you want something more professional/durable.
What are you talking about the upper 6 clips?
If so what i did was buy a set of NRG m6 fasteners and they come with nutserts that do the job. Unless you want something more professional/durable.
Thats exactly what I want.. so m6 is the size for the nut serts? I was was just looking at doing it myself at the hardware store
Thats exactly what I want.. so m6 is the size for the nut serts? I was was just looking at doing it myself at the hardware store
those are M6 but the inserts are more along the size of M8s, as they have "arms" that spread open. I think if you want actual nutserts it'll be a M8 or so.
No, they fit right in the support, the only one that's a bit tricky is the 2 clips? Don't know it's actual name but they insert in the support in the 2 inmost holes. The nutserts fit tight in there but they fit, might have to drill the clips slightly tho.
No, they fit right in the support, the only one that's a bit tricky is the 2 clips? Don't know it's actual name but they insert in the support in the 2 inmost holes. The nutserts fit tight in there but they fit, might have to drill the clips slightly tho.
ya i was looking at that.. ill make it work. Ordered from your link! Thank you! I have this thing off too much and those plastics get brittle
It sounds like I'm late to the party since you already ordered them, but I used some Time-Sert M10 x 1.25 x 20mm inserts and corresponding stainless stainless button head socket cap screws on mine. I, also, got tired of breaking those stupid OEM plastic push clips.
It sounds like I'm late to the party since you already ordered them, but I used some Time-Sert M10 x 1.25 x 20mm inserts and corresponding stainless stainless button head socket cap screws on mine. I, also, got tired of breaking those stupid OEM plastic push clips.
thats what i was originally thinking but m10 seemed big
No, they fit right in the support, the only one that's a bit tricky is the 2 clips? Don't know it's actual name but they insert in the support in the 2 inmost holes. The nutserts fit tight in there but they fit, might have to drill the clips slightly tho.