New Z emblem (no more Nissan burgers)
Thread Starter
Registered User
iTrader: (1)
Joined: Oct 2002
Posts: 306
Likes: 0
From: Ypsilanti, MI.
New Z emblem (no more Nissan burgers)
Ordered thru Courtesy Nissan(vendor on this site), excellent service, received emails and UPS tracking number as requested. Very happy customer here.
Below are what I ordered. I'm particularly happy with new Z emblem:
Below are what I ordered. I'm particularly happy with new Z emblem:
Trending Topics
Thread Starter
Registered User
iTrader: (1)
Joined: Oct 2002
Posts: 306
Likes: 0
From: Ypsilanti, MI.
311roadster:
On COUPE model: there are holes after removing rear emblem. Sorry, I am not sure if old emblem has pins in the back. Will know later though.
On ROADSTER model: there is no hole (I heard other roaster member mentioned)
synth19:
Just got home and opened the package, will install later and show pics.
bitst0rm:
please see below for order info:
Courtesy Nissan Parts
Rgd,
Mickey
On COUPE model: there are holes after removing rear emblem. Sorry, I am not sure if old emblem has pins in the back. Will know later though.
On ROADSTER model: there is no hole (I heard other roaster member mentioned)
synth19:
Just got home and opened the package, will install later and show pics.
bitst0rm:
please see below for order info:
Courtesy Nissan Parts
Rgd,
Mickey
Last edited by mickey; Jul 16, 2004 at 01:33 PM.
Guest
Posts: n/a
i used a hair dryer to heat up the adhesive. then i used a plastic knife to wedge under a corner. ok then i left the knife under it. and i took a plastic spoon and pryed the rest up little bit by little bit working in a circular motion. it was pretty easy if you heat the old emblem up enough. just keep that knife wedged under it to get it started . the only thing you might want to do that i didnt is put a rag or paper towel between the spoon and the bumper cause i was putting a fair amount of pressure on it. all in all it took me around 10 minutes
as for the red tape. trust me its on there firm. the emblems not goin anywhere!
if you guys are wanting to use carbon fiber inserts like i did just see the other emblem post for my recommendations or PM me.
the emblems are cut in a way where just snapping the CF inserts in might not work . i add to use adhesive on mine
you guys might figure out a better way but it worked for me.
i took quite a few pics but i forgot my USB cable. but i promise ill have pics up tonight!
hope this helps
as for the red tape. trust me its on there firm. the emblems not goin anywhere!
if you guys are wanting to use carbon fiber inserts like i did just see the other emblem post for my recommendations or PM me.
the emblems are cut in a way where just snapping the CF inserts in might not work . i add to use adhesive on mine
you guys might figure out a better way but it worked for me.
i took quite a few pics but i forgot my USB cable. but i promise ill have pics up tonight!
hope this helps
