Rough Idle & Tach Needle Malfunction Resolved
Today I took my car in to have the Mass Air Flow Sensor replaced, it was malfunctioning and causing a rough idle. It is now much better.
My Tach Needle was also malfunctioning. It would sit at 2,000 RPM for a while, then flip back up and start reading the RPM's again. The dealer had told me that the malfunctioning MAF sensor was also causing the Tach to screw up because they were somehow related.
I thought the MAF sensor was the only thing they were replacing, but it took all day. HELLO I WANT MY CAR!! Turns out they had also replaced the entire gauge pod, after speaking with Nissan about the problem.
So far so good. $1,230.00 later. Mileage in to dealer 4,001 miles out of dealer 3,700, oops somebody screwed up when they added in the mileage on the new gauge pod, oooh well I'm not complaining.
Have been waiting to have this fixed to install my JWT Pop Charger. The sound is unbelievably cool and I noticed the engine response instantly. Cant say I noticed a 6.5 HP gain, but it sure acts different all together. I love it, great mod!!!
My Tach Needle was also malfunctioning. It would sit at 2,000 RPM for a while, then flip back up and start reading the RPM's again. The dealer had told me that the malfunctioning MAF sensor was also causing the Tach to screw up because they were somehow related.
I thought the MAF sensor was the only thing they were replacing, but it took all day. HELLO I WANT MY CAR!! Turns out they had also replaced the entire gauge pod, after speaking with Nissan about the problem.
So far so good. $1,230.00 later. Mileage in to dealer 4,001 miles out of dealer 3,700, oops somebody screwed up when they added in the mileage on the new gauge pod, oooh well I'm not complaining.
Have been waiting to have this fixed to install my JWT Pop Charger. The sound is unbelievably cool and I noticed the engine response instantly. Cant say I noticed a 6.5 HP gain, but it sure acts different all together. I love it, great mod!!!
Last edited by SeanG; Mar 26, 2004 at 03:52 PM.
no more rough idle and popping type noises now ? wow, I do need to take mine in .. the only problem I have seen with my tach is sometimes the needle seems to be bouncing .. but i never gets stuck..
any new rattles since they replaced the guages?
was yours a 2004, or a 2004.5 ? did yours have feathering too ?
any new rattles since they replaced the guages?
was yours a 2004, or a 2004.5 ? did yours have feathering too ?
Originally posted by mode101
no more rough idle and popping type noises now ? wow, I do need to take mine in .. the only problem I have seen with my tach is sometimes the needle seems to be bouncing .. but i never gets stuck..
any new rattles since they replaced the guages?
was yours a 2004, or a 2004.5 ? did yours have feathering too ?
no more rough idle and popping type noises now ? wow, I do need to take mine in .. the only problem I have seen with my tach is sometimes the needle seems to be bouncing .. but i never gets stuck..
any new rattles since they replaced the guages?
was yours a 2004, or a 2004.5 ? did yours have feathering too ?
No new rattles, I just notice when I got home that they forgot to put the fuse box cover back on and when I was under there putting it back I noticed a missing screw for the dash. I'm going back tomorrow to have it put back in.
I have a 2004 7/03 build date, no tire feathering as of yet.
Trending Topics
Originally posted by Richardew
What did you have to pay for? Isn't it a warrenty repair?
rich
What did you have to pay for? Isn't it a warrenty repair?
rich
Originally posted by SeanG
Today I took my car in to have the Mass Air Flow Sensor replaced, it was malfunctioning and causing a rough idle. It is now much better.
My Tach Needle was also malfunctioning. It would sit at 2,000 RPM for a while, then flip back up and start reading the RPM's again. The dealer had told me that the malfunctioning MAF sensor was also causing the Tach to screw up because they were somehow related.
I thought the MAF sensor was the only thing they were replacing, but it took all day. HELLO I WANT MY CAR!! Turns out they had also replaced the entire gauge pod, after speaking with Nissan about the problem.
So far so good. $1,230.00 later. Mileage in to dealer 4,001 miles out of dealer 3,700, oops somebody screwed up when they added in the mileage on the new gauge pod, oooh well I'm not complaining.
Have been waiting to have this fixed to install my JWT Pop Charger. The sound is unbelievably cool and I noticed the engine response instantly. Cant say I noticed a 6.5 HP gain, but it sure acts different all together. I love it, great mod!!!
Today I took my car in to have the Mass Air Flow Sensor replaced, it was malfunctioning and causing a rough idle. It is now much better.
My Tach Needle was also malfunctioning. It would sit at 2,000 RPM for a while, then flip back up and start reading the RPM's again. The dealer had told me that the malfunctioning MAF sensor was also causing the Tach to screw up because they were somehow related.
I thought the MAF sensor was the only thing they were replacing, but it took all day. HELLO I WANT MY CAR!! Turns out they had also replaced the entire gauge pod, after speaking with Nissan about the problem.
So far so good. $1,230.00 later. Mileage in to dealer 4,001 miles out of dealer 3,700, oops somebody screwed up when they added in the mileage on the new gauge pod, oooh well I'm not complaining.
Have been waiting to have this fixed to install my JWT Pop Charger. The sound is unbelievably cool and I noticed the engine response instantly. Cant say I noticed a 6.5 HP gain, but it sure acts different all together. I love it, great mod!!!
My tach stuck once at about 3000 RPM for a few second. At that time, I reved my engine but the tach did not move at all.
But it never happen again since then (a few month ago).
If it happem again I will go to the dealer.
But it never happen again since then (a few month ago).
If it happem again I will go to the dealer.
Originally posted by 006Roadster
What's the JWT Pop Charger?
What's the JWT Pop Charger?
http://www.courtesyparts.com/Merchan...Code=Z3303-JWT
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
Jan 2, 2022 12:58 PM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM




