bullet proof 6 speed
#1
bullet proof 6 speed
who makes bullet proof 6 speed tranny's for Z's. The stock trans is prone for problems in the long run. Why does the Z have one of the weakest trannies when compared to others?
#5
Originally Posted by skeet96707
who makes bullet proof 6 speed tranny's for Z's. The stock trans is prone for problems in the long run. Why does the Z have one of the weakest trannies when compared to others?
you need to stop listening to whomever is feeding you from the BS tree
Trending Topics
#18
Originally Posted by leozim
our stock tranny is one of the beefest (if that is a word) tranny out there!!
#19
Try here:
http://www.quaife.co.uk/
I didn't dig too deep, no idea if this is the same company as above:
http://www.quaifeamerica.com/transmi...trans_main.htm
Or an alternative might be (if they any one makes them) would just be new heavier duty internals.
http://www.quaife.co.uk/
I didn't dig too deep, no idea if this is the same company as above:
http://www.quaifeamerica.com/transmi...trans_main.htm
Or an alternative might be (if they any one makes them) would just be new heavier duty internals.
#20
Is there a such thing as bullet proof trannies. I'm sure any tranny can be destoyed.
Oh and that thread that bigbri did compared side by side the two trannies, ours and the getrag. All the gears looked beafier in the nissan tranny. Now compared to american trannies, I don't know.
Hey skeet96707 what exactly are you running that would need a stronger tranny. By the way Sam at GTMotorsports was designing something for our transmissions to make them stronger. Might want to check with them.
Oh and that thread that bigbri did compared side by side the two trannies, ours and the getrag. All the gears looked beafier in the nissan tranny. Now compared to american trannies, I don't know.
Hey skeet96707 what exactly are you running that would need a stronger tranny. By the way Sam at GTMotorsports was designing something for our transmissions to make them stronger. Might want to check with them.
Last edited by redman333; 07-19-2007 at 03:32 PM.