bdahern

iTrader: (9)

I have a Fosgate P3002 (specs are 300 watts RMS bridged at 4 ohm) that I had in my RSX - i want to put that in the new Z (Enthusiast) behind the driver's seat and power one 10" sub - planning to get the ZEnclosure single box.

I was thinking either a Polk/MOMO MM2104 or a JL 10W3v2 - they both seem to be designed for smaller boxes and run about the power i have available.

Any thoughts on these subs or any other suggestions based on that box design would be appreciated.