ZEnclosures FREE SHIPPING Until 8-31
08-28-2006 | 05:58 AM
#21
Originally Posted by matrix311
I ordered my box from Mike yesterday, can't wait to get it. Now I gotta find some JL 10w6v2's to fit inside. Anyone recommend any place to buy some besides ebay that will have some good prices?
08-29-2006 | 06:10 AM
#22
would to give me a discount if i bought a 2-10inch under strut without a amp rack
and a 2-12inch altima box? say 225? thats a 19 dollar discount
let me know. if you can do it ill pay imediately after seeing the reply
and a 2-12inch altima box? say 225? thats a 19 dollar discount
let me know. if you can do it ill pay imediately after seeing the reply
08-29-2006 | 12:10 PM
#23
Originally Posted by John@Victory
would to give me a discount if i bought a 2-10inch under strut without a amp rack
and a 2-12inch altima box? say 225? thats a 19 dollar discount
let me know. if you can do it ill pay imediately after seeing the reply
and a 2-12inch altima box? say 225? thats a 19 dollar discount
let me know. if you can do it ill pay imediately after seeing the reply
08-29-2006 | 02:06 PM
#26
Originally Posted by mlg9770
I built this box for a local awhile back and I never heard back from him. Its a larger than normal corner box since its MDF. I believe it was around .50-.55 cu ft with approx. 6.5" mounting depth. If anyone's interested its ready to ship.
$75.00 shipped
$75.00 shipped
08-29-2006 | 02:14 PM
#27
Originally Posted by matrix311
I ordered my box from Mike yesterday, can't wait to get it. Now I gotta find some JL 10w6v2's to fit inside. Anyone recommend any place to buy some besides ebay that will have some good prices?
08-29-2006 | 02:34 PM
#29
Originally Posted by tahoe-man
10w6v2 need 6.9" so I don't assume it won't fit.
Originally Posted by mlg9770
with approx. 6.5" mounting depth.
08-29-2006 | 03:00 PM
#30
Originally Posted by USN HM 350Z
if you can tell me for sure if a JL 10w6v2 will fit in there I would be interested.
I'm not 100% sure it will fit. I dont have a w6 for test fitting......sorry
The back panel is angled....the least amount of depth at the far edge of the hole is 6.5". On the other side of the hole there's 8.5". Since the magnet is smaller than the hole it might fit.....hope this makes since. When I measure dead center of the sub hole its 7.5".
08-29-2006 | 03:08 PM
#31
Originally Posted by behjjeh
any special deal on them? 
08-29-2006 | 03:44 PM
#33
Registered User
Joined: Mar 2003
Posts: 321
Likes: 0
From: Earth
Originally Posted by behjjeh
if you want the brand new subs, always.. EBAY!!
This is the case with JL at the very least (not sure of all the others.)
That is why I couldn't believe Nazar's prices. His shop Wickedcas.com, (check out the sick 350z work) are authorized JL dealers which is hard to come by.
08-30-2006 | 11:25 AM
#36
Originally Posted by John@Victory
thanks mike cant wait to recieve the z and altima boxes! hope the weather doesnt tear things up too bad down there
They shipped out today........thanks
08-31-2006 | 08:30 PM
#38
very excited, just ordered my box couple days ago. AWESOME customer service. delayed shipping for my box so it gets to my house when i want it to. haven't come across anything even close to Mike's customer service on eBay or in an actual store.
09-01-2006 | 03:02 AM
#39
Originally Posted by mlg9770
I'm not 100% sure it will fit. I dont have a w6 for test fitting......sorry
The back panel is angled....the least amount of depth at the far edge of the hole is 6.5". On the other side of the hole there's 8.5". Since the magnet is smaller than the hole it might fit.....hope this makes since. When I measure dead center of the sub hole its 7.5".
The back panel is angled....the least amount of depth at the far edge of the hole is 6.5". On the other side of the hole there's 8.5". Since the magnet is smaller than the hole it might fit.....hope this makes since. When I measure dead center of the sub hole its 7.5".
09-01-2006 | 07:21 AM
#40
Originally Posted by mlg9770
I'm not 100% sure it will fit. I dont have a w6 for test fitting......sorry
The back panel is angled....the least amount of depth at the far edge of the hole is 6.5". On the other side of the hole there's 8.5". Since the magnet is smaller than the hole it might fit.....hope this makes since. When I measure dead center of the sub hole its 7.5".
The back panel is angled....the least amount of depth at the far edge of the hole is 6.5". On the other side of the hole there's 8.5". Since the magnet is smaller than the hole it might fit.....hope this makes since. When I measure dead center of the sub hole its 7.5".