Notices
Audio & Video 350Z Mobile entertainment and other electronics

non custom box

Thread Tools
 
Search this Thread
 
Old 03-08-2007, 06:39 AM
  #21  
16psibrick
Sponsor
Simplicity in Sound
iTrader: (10)
 
16psibrick's Avatar
 
Join Date: Jan 2006
Location: san Jose, CA
Posts: 2,792
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by StreetOC192
Some nice equipment, but $22,000????? Let's do the math here.

2 jl 12w7 - $1000
2 jl 1000/1 - $1100
2 jl 300/2 - $600
2 sets mb quart qsd series 6.5" seperates - $700
1 "the cap" 15 farad cap - $400
1 ohio generator 140amp (i believe) alternator - $500
2 optima batteries - $300
1 kenwood excellon 911dvd deck - $500 (?)
0 gauge wiring and so forth - $400 (including sound damping & wiring)
with a full custom enclosure done by innovative audio in washington - $16,500

That's an expensive custom install!!!!!
nice, way to quote EGAY prices for someone who went to a shop to have it done lol.

total parts cost on it should be about 50-60 percent higher than what you listed. not to mention if he did full car dampening thats another few grand.

but looking at the pics, i would have to agree a little bit...i think that install shouldnt cost 22k...I think i can probably pull that one off for about 10-15k (depending on dampening, power requirements and a few other things) and use the same level of not better sounding equipment

either way, back on topic...in the Z, i dont thin kyou should be looking at porting a 12w7...unless you just want to loose as much trunk space as possible and also weight it down as much as possible

why not get a sealed understrut box that holds a 12? i think a few placse make a curved fiberglass one...
Old 03-08-2007, 06:54 AM
  #22  
StreetOC192
Registered User
iTrader: (7)
 
StreetOC192's Avatar
 
Join Date: Aug 2006
Location: NJ
Posts: 2,136
Likes: 0
Received 0 Likes on 0 Posts
Default

OK, even at MSRP of what i could find........

2 jl 12w7 - $1700
2 jl 1000/1 - $2000
2 jl 300/2 - $960
2 sets mb quart qsd series 6.5" seperates - $3000
1 "the cap" 15 farad cap - $500
1 ohio generator 140amp (i believe) alternator - $700
2 optima batteries - $320
1 kenwood excellon 911dvd deck - $1200
0 gauge wiring and so forth - $500

Equals $10,880........still leaves $11,120 for labor............

My point was that the install was extremely expensive for what was installed.

Last edited by StreetOC192; 03-08-2007 at 06:58 AM.
Old 03-08-2007, 07:56 AM
  #23  
16psibrick
Sponsor
Simplicity in Sound
iTrader: (10)
 
16psibrick's Avatar
 
Join Date: Jan 2006
Location: san Jose, CA
Posts: 2,792
Likes: 0
Received 1 Like on 1 Post
Default

so yo pretty much agreed with my post 100 percent then? hehe
Old 03-08-2007, 09:34 AM
  #24  
StreetOC192
Registered User
iTrader: (7)
 
StreetOC192's Avatar
 
Join Date: Aug 2006
Location: NJ
Posts: 2,136
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 16psibrick
so yo pretty much agreed with my post 100 percent then? hehe
Oh, most definitely. I wasn't disagreeing at all.
Old 03-08-2007, 12:38 PM
  #25  
icedoutis
Banned
Thread Starter
iTrader: (5)
 
icedoutis's Avatar
 
Join Date: Jul 2006
Location: kirkland, WA
Posts: 579
Likes: 0
Received 0 Likes on 0 Posts
Default

that sounds about right. What screwed me was that I did my audio in stages. first stage was 2 12's and only 1 amp in a custom box. Next stage, I added another amp for the subs, the mb quartz, and the 2 300/2's. Had to build another enclosure for that one (just not the subs) and a custom amp rack that would clear my strut bar and still look good. third stage was the deck. had 4 and 5 planned...but i decided to get more power instead.
Old 03-08-2007, 05:12 PM
  #26  
16psibrick
Sponsor
Simplicity in Sound
iTrader: (10)
 
16psibrick's Avatar
 
Join Date: Jan 2006
Location: san Jose, CA
Posts: 2,792
Likes: 0
Received 1 Like on 1 Post
Default

like a few of my customers, make the drive down to norcal, i will be sure you get an install that you probably would pay a LOT more for at your local high end shop haha

ether way...good luck!

b
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gruppe-S
Body Interior
13
05-16-2016 10:42 PM
Rowlett
Misc.
3
10-02-2015 10:38 AM



Quick Reply: non custom box



All times are GMT -8. The time now is 07:22 PM.