-=///Sound System\\\=-
#1
Registered User
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: wpb, fl
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
-=///Sound System\\\=-
Alright, well I've had some of these components laying around for over a year and a half. The subs & box I've had for over 6 months..
ORIGINAL POST:
https://my350z.com/forum/audio-and-video/201925-they-see-me-rollin.html
I finally got my Z and this was basically the 1st thing I've done to it.. test pipes and hks on the way ..
COMPONENTS:
AMPS:
JL Audio 500/1
JL Audio 300/4 (my 20GB empeg doesn't have a preamp)
SUBS:
2x Sound Splinter Rl-i10's
HEADUNIT:
20GB Rio Empeg
BOX:
TCCustomz (edited) 350z Sub Box
I have to say the hardest thing about this project was sanding down the sub box.. maybe my subs were unusually large in diameter but I sanded for honestly 3 hours between the 2 holes and got no where.. I went to my friends and he bought the correct tool and it only took 15 minutes or so, you'll see in the progress pics.. This system gets pretty loud, it's amazing!! ENJOY!!
My hardworking 19 year old cousin's Z06 (he pays for his car.. and ZX-14 )
PROGRESS PICS:
COMPLETE!!! besides the faceplate
I have an appointment this wednesday for TINTING:
15% on SIDES
35% on WINDSHIELD
5% on REAR WINDSHIELD (because of the amps)
THANKS FOR LOOKING!! And thanks to nick ex-350z owner, without this guy, I wouldn't have finished this thing!!
ORIGINAL POST:
https://my350z.com/forum/audio-and-video/201925-they-see-me-rollin.html
I finally got my Z and this was basically the 1st thing I've done to it.. test pipes and hks on the way ..
COMPONENTS:
AMPS:
JL Audio 500/1
JL Audio 300/4 (my 20GB empeg doesn't have a preamp)
SUBS:
2x Sound Splinter Rl-i10's
HEADUNIT:
20GB Rio Empeg
BOX:
TCCustomz (edited) 350z Sub Box
I have to say the hardest thing about this project was sanding down the sub box.. maybe my subs were unusually large in diameter but I sanded for honestly 3 hours between the 2 holes and got no where.. I went to my friends and he bought the correct tool and it only took 15 minutes or so, you'll see in the progress pics.. This system gets pretty loud, it's amazing!! ENJOY!!
My hardworking 19 year old cousin's Z06 (he pays for his car.. and ZX-14 )
PROGRESS PICS:
COMPLETE!!! besides the faceplate
I have an appointment this wednesday for TINTING:
15% on SIDES
35% on WINDSHIELD
5% on REAR WINDSHIELD (because of the amps)
THANKS FOR LOOKING!! And thanks to nick ex-350z owner, without this guy, I wouldn't have finished this thing!!
Last edited by faithmassive; 03-27-2007 at 08:06 AM.
#4
Banned
iTrader: (3)
Originally Posted by faithmassive
Alright, well I've had some of these components laying around for over a year and a half. The subs & box I've had for over 6 months..
ORIGINAL POST:
https://my350z.com/forum/showthread.php?t=201925
I finally got my Z and this was basically the 1st thing I've done to it.. test pipes and hks on the way ..
COMPONENTS:
AMPS:
JL Audio 500/1
JL Audio 300/4 (my 20GB empeg doesn't have a preamp)
SUBS:
2x Sound Splinter Rl-i10's
HEADUNIT:
20GB Rio Empeg
BOX:
ZEnclosures 350z Sub Box
I have to say the hardest thing about this project was sanding down the sub box.. maybe my subs were unusually large in diameter but I sanded for honestly 3 hours between the 2 holes and got no where.. I went to my friends and he bought the correct tool and it only took 15 minutes or so, you'll see in the progress pics.. This system gets pretty loud, it's amazing!! ENJOY!!
My hardworking 19 year old cousin's Z06 (he pays for his car.. and ZX-14 )
PROGRESS PICS:
COMPLETE!!! besides the faceplate
I have an appointment this wednesday for TINTING:
15% on SIDES
35% on WINDSHIELD
5% on REAR WINDSHIELD (because of the amps)
THANKS FOR LOOKING!! And thanks to nick ex-350z owner, without this guy, I wouldn't have finished this thing!!
ORIGINAL POST:
https://my350z.com/forum/showthread.php?t=201925
I finally got my Z and this was basically the 1st thing I've done to it.. test pipes and hks on the way ..
COMPONENTS:
AMPS:
JL Audio 500/1
JL Audio 300/4 (my 20GB empeg doesn't have a preamp)
SUBS:
2x Sound Splinter Rl-i10's
HEADUNIT:
20GB Rio Empeg
BOX:
ZEnclosures 350z Sub Box
I have to say the hardest thing about this project was sanding down the sub box.. maybe my subs were unusually large in diameter but I sanded for honestly 3 hours between the 2 holes and got no where.. I went to my friends and he bought the correct tool and it only took 15 minutes or so, you'll see in the progress pics.. This system gets pretty loud, it's amazing!! ENJOY!!
My hardworking 19 year old cousin's Z06 (he pays for his car.. and ZX-14 )
PROGRESS PICS:
COMPLETE!!! besides the faceplate
I have an appointment this wednesday for TINTING:
15% on SIDES
35% on WINDSHIELD
5% on REAR WINDSHIELD (because of the amps)
THANKS FOR LOOKING!! And thanks to nick ex-350z owner, without this guy, I wouldn't have finished this thing!!
i live in WPB as well
spl show April 15 any interest in going and see what your 2 subs meter at
#5
Registered User
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: wpb, fl
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by StreetOC192
Nice box/subs and amprack!!!
what's the deal with the Rio headunit? closer pics? how did you install? Is it an actual headunit or just an MP3 hard drive player?
what's the deal with the Rio headunit? closer pics? how did you install? Is it an actual headunit or just an MP3 hard drive player?
#7
Registered User
iTrader: (7)
Join Date: Aug 2006
Location: NJ
Posts: 2,136
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by faithmassive
alright.. I think they started making these in the UK like over 10 years ago.. they discontinued them at least 4 years ago.. so there's only a few floating around every once in awhile.. It's basically a laptop hard drive, I'm told you can swap them and put up to 2 in one unit. It plays mp3's and wma's.. A lot of people think it's outdated but besides the overly expensive "phat box" there isn't much that comes close to it. It suits my needs pretty well because I'm the kind of person switching genre's and artists after every song when I'm by myself at least.. it's difficult to do that with cd's, especially when you randomly want to hear a song that pop into your head.
And if you go to the SPL show, let us know how you do.
Trending Topics
#8
Banned
iTrader: (3)
Originally Posted by faithmassive
yeah that sounds cool. Where's the event?
http://www.precisionperformanceonlin...php?topic=18.0
April 15 th
10 am to 3 pm
all-tech spl competition @ No limit Audio
what do you got 2 ,10" or 2, 12"
what kinda amp on lows how many watts , what ohm
#11
Banned
iTrader: (3)
i read post
2 each sound splinter 10" subs 600 rms each
so you pushing 20 " of cone with about 500 watts
with only 1 500 mono Jl
if it was 1000 mono jl you be closer to full rms
i can guess that you will hit 140 legal 143 outlaw
hope fully see you there
very interested to see how 20" @ 500 watts sealed VS. 12" @ 2200 watts ported
good match up
2 each sound splinter 10" subs 600 rms each
so you pushing 20 " of cone with about 500 watts
with only 1 500 mono Jl
if it was 1000 mono jl you be closer to full rms
i can guess that you will hit 140 legal 143 outlaw
hope fully see you there
very interested to see how 20" @ 500 watts sealed VS. 12" @ 2200 watts ported
good match up
#13
Shift_Dorifto
iTrader: (17)
Join Date: Jul 2004
Location: Plano/Frisco, TX
Posts: 3,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by faithmassive
THANKS FOR LOOKING!! And thanks to nick ex-350z owner, without this guy, I wouldn't have finished this thing!!
I just wanted to quote your entire post including the pictures to let you know that i live in plano, tx and there are shows out here sometimes.
edit: Point was made...deleted pics from quote b/c I'm not really that cruel.
Last edited by kwiker; 03-27-2007 at 08:34 AM.
#14
Banned
iTrader: (3)
Originally Posted by kwiker
I just wanted to quote your entire post including the pictures to let you know that i live in plano, tx and there are shows out here sometimes.
how do you do at the shows in your area and what do you have in your z
#15
Registered User
Join Date: Jan 2006
Location: Indiana
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Isn't it going to be SO hot in your car with those hot a$$ amps right behind you like that? It seems like it would...looks pretty good, although I'm not big on how it protrudes out real far taking up trunk space. You probably don't put much back there, but it makes for less than normal. You might have to run the AC more to keep cool, which will make your whip slower than pond water.
#17
New Member
iTrader: (4)
Join Date: Nov 2006
Location: Dallas
Posts: 3,718
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 350zspl
if he drives to Texas i will be surprised
how do you do at the shows in your area and what do you have in your z
how do you do at the shows in your area and what do you have in your z
#18
Registered User
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: wpb, fl
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dubbzdiggler
Isn't it going to be SO hot in your car with those hot a$$ amps right behind you like that? It seems like it would...looks pretty good, although I'm not big on how it protrudes out real far taking up trunk space. You probably don't put much back there, but it makes for less than normal. You might have to run the AC more to keep cool, which will make your whip slower than pond water.
#19
Registered User
Thread Starter
iTrader: (3)
Join Date: Nov 2005
Location: wpb, fl
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hatchboi
didn't know zenclosure made that kind of box, where did you get it and how much? kinds of looks like a TCcustom box..
#20
Shift_Dorifto
iTrader: (17)
Join Date: Jul 2004
Location: Plano/Frisco, TX
Posts: 3,375
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ZSpectrum
He doesnt have any audio!! We have shows in this area kwiker, why was I not aware of this?
Anywho, i am going to do some work to my car when the w205 comes out. I have some Phoenix Gold Comp Ti 6.5 components, Elemental Design 7 inch subs (going in the stock component location behind the seats) and a Xenon 200.4 amp that i will use to power it all.
I'll probably post up some stuff when i get it done, it won't be for a while though...i still have to pull it all out of my firebird.
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
11-29-2015 03:58 PM