hi guys, just went to walmart and picked up some polyfil for the zenclosure box i just bought. but i was reading around the forums and found alot of people put polyfil in their boxes, but all in different ways. i read some people stapled it to the walls or glued it, and some just threw it in there. i just want to know if it matters or is there a best way in doing it. thanks.

 

Little dots of glue... oh and make sure you listen a lot to the sound before it... and then after.. I hit a few situations where the polyfil just made the sound worse (in this case less low bass).

 

Staples work great - you don't want the polyfill rubbing against the back of the woofer cone or spider.

 

alright thanks for the input guys =)

 

You really need to know "WHY" you would add polyfill. Polyfill is added to slow down the wavelengths to make the sub 'think' it's in a larger enclosure.

Things to consider:
-What is the optimal recommended enclosure size for the sub
-What is the cu ft of the enclosure being used

I usually use staples but dots of glue would work. you just don't want it loose in there as stated by Paul350Z already.