Radio 12v
yellow
+
radio harness


Radio Ground (chassis)
Radio Ignition lt. green + radio harness
Radio Illumination red/blue + radio harness
Factory Amp Turn-on green/yellow + radio harness
Power Antenna green/white + radio harness
LF Speaker +/- blue/red - black/white +,- radio harness
RF Speaker +/- yellow/red - red/white +,- radio harness
LR Speaker +/- lt. green/red - black/yellow +,- radio harness
RR Speaker +/- blue/orange - black/pink +,- radio harness

that might help.

 

you are getting sound so check the converter. There are pots inside to adjust the gains. Turn the pots until you get some sound... really there is a more exact way to do this but I don't car to explain test tones or the use of dmm.

But, Check the pots. You will need a little screw driver to adjust them.

If the converter for whatever reason does not have the puts, make sure the amp is adjusted (again check the gain pot).

 

thanks for all the help guys everything sounds good now.

 

oh yeah.. no prob ..