if any one has any helpful hints or tip please let me know.

 

bump

 

I didn't install your same speakers, but I know on my infinity kappa perfect components I had to use the stock speakers as spacers (kind of a b!tch) but got done none the less...check the how to do thread for speaker/door panel removal we found that very very helpful. Let me know if i can help you out anymore
later
Lips

 

1. Use a lot of Dynamat Extreme.
2. Drill out all the speaker grill holes in the door (this makes a massive difference).
3. Make MDF rings to move the woofer upwards and forwards in the doors. If you use the stock speaker mounts you'll find at full excursion you'll hit the surround to the speaker grill.
4. Close off the door skin to the door panel. I used egg crate material and funneled off the woofer to the door skin.