Best Coilovers for Under $2000?
#41
Registered User
Join Date: Jan 2003
Location: Riverside, California
Posts: 4,453
Likes: 0
Received 0 Likes
on
0 Posts
im gonna do 12/10 as well with a coilover in the rear.
you might as well doa revalve its a negligable amount and itll match your springs rates even better.
you might as well doa revalve its a negligable amount and itll match your springs rates even better.
#44
Registered User
Join Date: Dec 2002
Location: Canada B.C.
Posts: 1,204
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GY-Z
FYI, zeal v6 does not require revavling
i meant zeal v6 does not require revavle is you use 12/10 spring rate instead of 10/8.although if you insist to do it, i belive endless usa will still do it for you.
sorry for the confusion.
#46
New Member
iTrader: (4)
Join Date: Jun 2002
Location: Charlotte NC
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
If you want a cost effective setup that provides great handling on the street, autoX, and road course, I'd go with the NISMO S-Tune shock/spring combo, 350Evo Swaybars, and some adjustable upper control arms in the front (Unitech Racing's are great). You can get all of these parts combined for a little over $2000. I know this isn't a coilover setup, but it provides a nice amount of lowering, great adjustability for overall car balance with the swaybars, and the ability to dial in some camber in the front to acheive good turn-in. I've driven Z's on road courses, autoX, and the street with about 7 different suspension set-ups at this point. In fact, I've had 4 different suspensions on my own car over the last 3 years! So, I've had quite a bit of time to see what works, and what doesnt'.
If you want a top of the line, double adjustable coilover setup to be able to completely dial the car in at the track, then the Unitech/Truechoice Koni setup is the way to go (what I have on my car now). You'll be hearing a lot more about it in the near future as more people get them on their cars. This may be overkill though if you want to keep things simple, and it's considerably more money than your talking about. It is awesome though.
I think you need to answer the most fundamental question, "what do you want your car to do?" Do you want it to work well on the street? Do you want it to rip up an autoX course, or do you want to take it and do smokey drifts at Irwindale? Look at the whole car, and consider what you need to do to get it to accomplish your goals. Throwing some coilovers on the car and expecting it to handle well out of the box simply won't happen...even if you corner weight it. You need to look at everything including what tire choice/size you want to run front and rear.
From my experience, if I had to build a $2000 suspension for the car, the one I recommended above would be it. I guess my point is...think about the whole suspension/road interface, and what you want out of the car before making this decision.
If you want a top of the line, double adjustable coilover setup to be able to completely dial the car in at the track, then the Unitech/Truechoice Koni setup is the way to go (what I have on my car now). You'll be hearing a lot more about it in the near future as more people get them on their cars. This may be overkill though if you want to keep things simple, and it's considerably more money than your talking about. It is awesome though.
I think you need to answer the most fundamental question, "what do you want your car to do?" Do you want it to work well on the street? Do you want it to rip up an autoX course, or do you want to take it and do smokey drifts at Irwindale? Look at the whole car, and consider what you need to do to get it to accomplish your goals. Throwing some coilovers on the car and expecting it to handle well out of the box simply won't happen...even if you corner weight it. You need to look at everything including what tire choice/size you want to run front and rear.
From my experience, if I had to build a $2000 suspension for the car, the one I recommended above would be it. I guess my point is...think about the whole suspension/road interface, and what you want out of the car before making this decision.
#47
Registered User
iTrader: (14)
Join Date: May 2004
Location: Tracy Ca
Posts: 1,963
Likes: 0
Received 0 Likes
on
0 Posts
how much is your unitec/koni setup.. and it is bound and rebound adjustable correct?
i am actually looking at a set of zeal super function xR's which are double adjustable bound n rebound... remote reservoir, and quick disconnect reservoir fittings.. it seems pretty nice. Ive had experience w/ aragost as well as other high end coils for my old 240sx.. and so far the zeals seem to be well above par w/ anything i've had.
i am actually looking at a set of zeal super function xR's which are double adjustable bound n rebound... remote reservoir, and quick disconnect reservoir fittings.. it seems pretty nice. Ive had experience w/ aragost as well as other high end coils for my old 240sx.. and so far the zeals seem to be well above par w/ anything i've had.
#48
Registered User
Join Date: Dec 2002
Location: Canada B.C.
Posts: 1,204
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by anotheraznguy
how much is your unitec/koni setup.. and it is bound and rebound adjustable correct?
i am actually looking at a set of zeal super function xR's which are double adjustable bound n rebound... remote reservoir, and quick disconnect reservoir fittings.. it seems pretty nice. Ive had experience w/ aragost as well as other high end coils for my old 240sx.. and so far the zeals seem to be well above par w/ anything i've had.
i am actually looking at a set of zeal super function xR's which are double adjustable bound n rebound... remote reservoir, and quick disconnect reservoir fittings.. it seems pretty nice. Ive had experience w/ aragost as well as other high end coils for my old 240sx.. and so far the zeals seem to be well above par w/ anything i've had.
i dont think there's any application for 350z in modle B6?
#49
New Member
iTrader: (4)
Join Date: Jun 2002
Location: Charlotte NC
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
anotheraznguy,
See this link for info on the Unitech/Koni setup.
https://my350z.com/forum/wheels-and-tires/122754-truechoice-phase-iii-and-iv-da-coil-overs.html
See this link for info on the Unitech/Koni setup.
https://my350z.com/forum/wheels-and-tires/122754-truechoice-phase-iii-and-iv-da-coil-overs.html
#50
Registered User
iTrader: (6)
I love my Tein type Flex coilovers NOW, when i first had them installed i didnt like them much because of the spring rate, but after swapping the springs that come with the coilovers for a set of 10kg standardized springs from TEIN it is much more comfortable on the road, yet still stiff enough for the track. The Standardized springs are about $50 each so they are not too expensive. The Flex Coilovers can be used with spring rates of +/- 2kg so they can use springs of 10Kg to 14Kg before needing revalving.
Last edited by armt350z; 06-14-2005 at 08:44 PM.
#51
Registered User
iTrader: (16)
Join Date: Mar 2004
Location: Nashville, TN
Posts: 2,939
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by J Ritt
If you want a cost effective setup that provides great handling on the street, autoX, and road course, I'd go with the NISMO S-Tune shock/spring combo, 350Evo Swaybars, and some adjustable upper control arms in the front (Unitech Racing's are great). You can get all of these parts combined for a little over $2000. I know this isn't a coilover setup, but it provides a nice amount of lowering, great adjustability for overall car balance with the swaybars, and the ability to dial in some camber in the front to acheive good turn-in. I've driven Z's on road courses, autoX, and the street with about 7 different suspension set-ups at this point. In fact, I've had 4 different suspensions on my own car over the last 3 years! So, I've had quite a bit of time to see what works, and what doesnt'.
If you want a top of the line, double adjustable coilover setup to be able to completely dial the car in at the track, then the Unitech/Truechoice Koni setup is the way to go (what I have on my car now). You'll be hearing a lot more about it in the near future as more people get them on their cars. This may be overkill though if you want to keep things simple, and it's considerably more money than your talking about. It is awesome though.
I think you need to answer the most fundamental question, "what do you want your car to do?" Do you want it to work well on the street? Do you want it to rip up an autoX course, or do you want to take it and do smokey drifts at Irwindale? Look at the whole car, and consider what you need to do to get it to accomplish your goals. Throwing some coilovers on the car and expecting it to handle well out of the box simply won't happen...even if you corner weight it. You need to look at everything including what tire choice/size you want to run front and rear.
From my experience, if I had to build a $2000 suspension for the car, the one I recommended above would be it. I guess my point is...think about the whole suspension/road interface, and what you want out of the car before making this decision.
If you want a top of the line, double adjustable coilover setup to be able to completely dial the car in at the track, then the Unitech/Truechoice Koni setup is the way to go (what I have on my car now). You'll be hearing a lot more about it in the near future as more people get them on their cars. This may be overkill though if you want to keep things simple, and it's considerably more money than your talking about. It is awesome though.
I think you need to answer the most fundamental question, "what do you want your car to do?" Do you want it to work well on the street? Do you want it to rip up an autoX course, or do you want to take it and do smokey drifts at Irwindale? Look at the whole car, and consider what you need to do to get it to accomplish your goals. Throwing some coilovers on the car and expecting it to handle well out of the box simply won't happen...even if you corner weight it. You need to look at everything including what tire choice/size you want to run front and rear.
From my experience, if I had to build a $2000 suspension for the car, the one I recommended above would be it. I guess my point is...think about the whole suspension/road interface, and what you want out of the car before making this decision.
#55
Out of hiatus
iTrader: (234)
How often do you plan on tracking your car? I went with the JIC's and are very happy with them. The car handled great at the last track event and with some more experience I am pretty sure I can take on the more advanced drivers since my car is setup pretty nicely.
Side note: If you plan on tracking don't even bother with TEINS. I had the flex on my car and they suck on the track
Side note: If you plan on tracking don't even bother with TEINS. I had the flex on my car and they suck on the track
#56
Registered User
Join Date: Jan 2003
Location: Riverside, California
Posts: 4,453
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gruppe-S
We are now the official Endless/Zeal authorized dealer, please give me a call if you have any questions on them.
Tom
Tom
i take offense to that, you are A official
not THE official
#59
Registered User
Join Date: Jan 2003
Location: Riverside, California
Posts: 4,453
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Z1 Performance
Side note: If you plan on tracking don't even bother with TEINS. I had the flex on my car and they suck on the track
cmon dude, the only useful teins cost almost as much as Zeals, are like buying kroger...
#60
Former Sponsor
iTrader: (564)
Join Date: Feb 2003
Location: Long Island, New York
Posts: 19,266
Likes: 0
Received 5 Likes
on
5 Posts
having setup/run them on a few track day cars, I can assure you that is not the case.
with some cars, I'd agree...Zeal has it all over Tein. On other cars, given the design of the suspension in the first place, nearly anything can be setup to run very very well
with some cars, I'd agree...Zeal has it all over Tein. On other cars, given the design of the suspension in the first place, nearly anything can be setup to run very very well