NEW Stance SUS Coilover Review
#129
Registered User
iTrader: (27)
Join Date: May 2003
Location: Austin TX
Posts: 1,614
Likes: 0
Received 0 Likes
on
0 Posts
anyone with noise issues in the rear? I have some noise under slow speeds in the rear. I've made sure all the bolts are torqued down and there is preload on the spring.
It sounds like the top mount is loose but I know its not for sure. Anyone try putting a thin layer of rubber padding between the upper mount and the frame of the car?
It sounds like the top mount is loose but I know its not for sure. Anyone try putting a thin layer of rubber padding between the upper mount and the frame of the car?
#130
Registered User
iTrader: (14)
Join Date: May 2004
Location: Tracy Ca
Posts: 1,963
Likes: 0
Received 0 Likes
on
0 Posts
i've noticed this on a few cars its seems the rear does make a slight noise.
however you have to remember that
#1 the coilover has no rubber noise isolators.
#2 there is very little sound deadening where the coils mount to.
all that will make interior noise slightly more.
however you have to remember that
#1 the coilover has no rubber noise isolators.
#2 there is very little sound deadening where the coils mount to.
all that will make interior noise slightly more.
#132
Registered User
iTrader: (1)
Join Date: Aug 2004
Location: 21°19'51.22" N, 157°51'36.09"
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
^^^
actually no. That was using the stock coils and shock/struts. I had progress tech swaybars at med in front and back. I have SilkRoad coilovers now, but I've been reading a lot of good things with Stance so far. I may go with Stance whenever the Silks blows...so maybe in a few years .
actually no. That was using the stock coils and shock/struts. I had progress tech swaybars at med in front and back. I have SilkRoad coilovers now, but I've been reading a lot of good things with Stance so far. I may go with Stance whenever the Silks blows...so maybe in a few years .
Last edited by 636Racer; 07-31-2006 at 02:01 PM.
#133
Z + Rear Seat
iTrader: (3)
Join Date: Jun 2005
Location: St.Pete,FL
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 636Racer
I have SilkRoad coilovers now, but I've been reading a lot of good things with Stance so far. I may go with Stance whenever the Silks blows...so maybe in a few years .
#135
Registered User
Join Date: Apr 2004
Location: Kalifornia
Posts: 1,255
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by anotheraznguy
+1 for stance =)
CAn you PM some prices for the stance coilovers, installed on a 2003 Z, non-brembo? Also, how long do you need the car to do the install? I work in The City during the week and would need to make arrangements if it took too long. Thanks
#139
Registered User
Join Date: Jul 2004
Location: CaCdis Ln
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
+1million for Stance coilovers. here are what they look like on a G. also, there is about 2+ inches left to go down.
Last edited by sen_jen; 08-02-2006 at 10:17 AM.
#140
Registered User
Join Date: Jul 2004
Location: CaCdis Ln
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ATL_Red_G35
So the one-bodied setup in the rear hold out good on the tracks?