No love for the 05 G's or 06 Z's.

 

The line-lock (for parking brake) installs into the rear brake line along with the proportioning valve when doing a full install on the front and rear BBK, I prefer to eliminate the ABS , traction control etc. for manual control of brake bias, minimum weight and maximum performance. They would be mounted in place of the old handbrake as pictured here on an early Z http://www.arizonazcar.com/propv.jpg
Not a big job if you know your way around brake systems.
My rear kit works great without all that if you dont need a parking brake and want to retain the stock ABS and plumbing.
To engage the line-lock you would hold the brake pedal down with medium pressure
and push down on the button, when you take your foot off , pressure remains in the rear calipers and the car wont roll. To release the LL just push on the brake pedal again and the button pops up. I've have had a lot of requests
for a really nice mechanical caliper for the parking brake so I'm looking at manufacturing them in house in the near future as time allows.
Dave

ARIZONA Z CAR
2043 E. QUARTZ ST.
MESA AZ 85213

480-844-9677
dave@arizonazcar.com
www.arizonazcar.com

 

Yeah but... can I get them in RED? Please?

 

Sorry, I have them in any color you want as long as it's black.
For $3 extra I'll throw in a can of Krylon.
Dave

 

Okay... How about a Gourp Buy for our members? You can do it!

 

That Krylon idea rocks. Thanks for the info on the line locks Dave.

Precision Brake has a caliper for a parking brake, looks like a good idea.

 

AZC:

Do the rotor centers come only in the color shown in the pics or can you do them in black... They are adonized, yes?

Also... Why this slotted rotor design?

Thanks in advance...

 

I have the centers on the shelf with red anodize, I could strip some and do another color for what it costs (usually $75 ) would be cheaper to do several at once.
Asymetrical slots were done to cut down resonance, we might do some custom slotting in the future like these.


Dave

ARIZONA Z CAR
2043 E. QUARTZ ST.
MESA AZ 85213

480-844-9677
dave@arizonazcar.com
www.arizonazcar.com

 

Please tell me you're joking right? How about the standard Slots and dots/holes? You have that in the R&d phase too right?

 

Regular slots/holes/dimples would be great...

AZC:
Is that $75 per side or both?

 

The anodizing costs the same if i do 1 piece or 10, so it's way cheaper to do as many pieces of a given color at a time as possible.
Dave

 

Nice.