Wilwood BBK Fastbrakes.com Install
#21
Registered User
iTrader: (1)
Join Date: Jul 2004
Location: Boston
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I was looking at the rear kit, and noticed this:
"Note: Installation of this kit requires partial removal of the dust shield and minor trimming of caliper mounts."
I knew the dust shield would have to go, but trimming of the caliper mounts? Does anyone know what part of the mounts are trimmed? Also, I would assume that they include a mounting bracket, shouldn't it come pre-trimmed? Maybe the trimming is to the mounting surface.
"Note: Installation of this kit requires partial removal of the dust shield and minor trimming of caliper mounts."
I knew the dust shield would have to go, but trimming of the caliper mounts? Does anyone know what part of the mounts are trimmed? Also, I would assume that they include a mounting bracket, shouldn't it come pre-trimmed? Maybe the trimming is to the mounting surface.
#22
Banned
Thread Starter
iTrader: (1)
Join Date: Sep 2005
Location: Southern, MA
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Yes, the rear kit does come w/ a bracket. The top of mounting surface of the rear hub needs to be filed down a few thousands of an inch to fit perfect. The slight modification is required to insure 100% Pad to rotor contact with ZERO overlap.
#28
Registered User
iTrader: (25)
Join Date: Oct 2003
Location: Orlando, FL
Posts: 2,864
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm interested in the front and rear 4pot. I only need to know if calipers will clear my volks...
and you say the rotors are 13.6 and only will come slotted?? not cross drill?
and you say the rotors are 13.6 and only will come slotted?? not cross drill?
#30
Banned
Thread Starter
iTrader: (1)
Join Date: Sep 2005
Location: Southern, MA
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I’m running a 26mm offset with plenty of room to spare, my guess is even a 30mm offset would work. I know they can special order dimpled/slotted rotors like on my set-up, not sure about drilled, but personally I would say away from drilled rotors.
#32
Banned
Thread Starter
iTrader: (1)
Join Date: Sep 2005
Location: Southern, MA
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Fastbrakes has offered drilled/slotted rotors in any combination for the group buy prices.
They also have 3 front slotted kits ready to ship, just need two more kits to go!
They also have 3 front slotted kits ready to ship, just need two more kits to go!
#35
Registered User
iTrader: (20)
Join Date: May 2006
Location: Houston, TX & WPB, FL
Posts: 1,946
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
you can get the fastbreaks wilwood front kit for 1250 without a group buy.
http://hpautoworks.chainreactionweb....a59cb263561fca
just for everybodies info
http://hpautoworks.chainreactionweb....a59cb263561fca
just for everybodies info
#36
Registered User
iTrader: (6)
Join Date: Nov 2005
Location: Cali
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by masterj26
you can get the fastbreaks wilwood front kit for 1250 without a group buy.
http://hpautoworks.chainreactionweb....a59cb263561fca
just for everybodies info
http://hpautoworks.chainreactionweb....a59cb263561fca
just for everybodies info