Some new SPL stuff sneak peak
#82
350Z-holic
iTrader: (113)
Originally Posted by z-u-later
SPL has the rear endlinks in stock . . . it's the front endlinks they don't have in stock.
Originally Posted by kuah
As for the endlinks, the current 350Z rear endlinks are actually a carry-over from our 300ZX front endlinks. To go one better than the competition, I have decided to design all new endlinks front and rear for the 350Z using the new series of QA1 high-misalignment rod ends, which are extremely strong and will allow for more angular misalignment than ball joints. I would say probably a Feb time frame for the new F&R endlinks.
#83
Registered User
Thread Starter
iTrader: (4)
Join Date: Sep 2002
Location: Austin
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by USN HM 350Z
nooooooooooooooooooooooooooooooooooooo
I need the rears....................................
I need the rears....................................
#86
New Member
iTrader: (2)
Join Date: Jan 2004
Location: Riyadh, SA
Posts: 1,295
Likes: 0
Received 0 Likes
on
0 Posts
SPL End Links Order List
1. z-u-later (front & rear end links)
2. USN HM 350Z (F & R)
3.deviljon (front and rear)
4. axolotol81 (Front and Rear)
5. jmckuhen (front & rear)
6. NoLimit (front & rear)
7. SpoilsofWar (front & rear)
8. JZ350
9. aalzuhair
10.
Thanks SPL
Az
1. z-u-later (front & rear end links)
2. USN HM 350Z (F & R)
3.deviljon (front and rear)
4. axolotol81 (Front and Rear)
5. jmckuhen (front & rear)
6. NoLimit (front & rear)
7. SpoilsofWar (front & rear)
8. JZ350
9. aalzuhair
10.
Thanks SPL
Az
#88
Registered User
iTrader: (2)
Join Date: Jan 2005
Location: Whorelando
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
yea i wish those rediculous comments where erased from this thread, i see no validity in that kids comments looking at spl products and sfarrahs ride, i see no reason why that kid was talking up a storm with no knowldge of a rebuttle that can make sense towards your products. Good luck and keep up the good work , mods should delete that kids posts.. He clearly has no idea of suspension considering grandam Zs use a similar setup aswell. Its beyond me what people say in peoples threads.
#89
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by USN HM 350Z
any new update Kuah
Prototype front endlinks going on sfarrah's Z for track testing this weekend. The endlink parts are all scheduled for production and should be done within 2 weeks, then another few days for plating. So looking to release endlinks end of the month.
Next up on production is a new low profile ball joint replacement for our front upper arms to address the knocking/suspension travel issue on cars lowered with relatively soft springs. This should be done very quick, 1-2 days. The rear mid links are up next and hopefully will have the first few from production by mid next month.
#90
Registered User
iTrader: (43)
Join Date: Jun 2006
Location: Lone Star State
Posts: 2,757
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the update, kuah. We just need an update from sfarrah after this weekend on how the new endlinks perform. I read somewhere in this forum that you guys are running at TWS this weekend. Too bad I can't hook up with you guys . . . I won't be at College Station until the following weekend.
#91
New Member
iTrader: (2)
Originally Posted by kuah
Sorry about the delays, due to the holidays most of our machining jobs got pushed back and I had to get some other items for the 240SX/300ZX made first due to backorders.
Prototype front endlinks going on sfarrah's Z for track testing this weekend. The endlink parts are all scheduled for production and should be done within 2 weeks, then another few days for plating. So looking to release endlinks end of the month.
Next up on production is a new low profile ball joint replacement for our front upper arms to address the knocking/suspension travel issue on cars lowered with relatively soft springs. This should be done very quick, 1-2 days. The rear mid links are up next and hopefully will have the first few from production by mid next month.
Prototype front endlinks going on sfarrah's Z for track testing this weekend. The endlink parts are all scheduled for production and should be done within 2 weeks, then another few days for plating. So looking to release endlinks end of the month.
Next up on production is a new low profile ball joint replacement for our front upper arms to address the knocking/suspension travel issue on cars lowered with relatively soft springs. This should be done very quick, 1-2 days. The rear mid links are up next and hopefully will have the first few from production by mid next month.
Will
#93
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Resolute
Any plans to offer a lower front arm to properly relocate the roll center on the front suspension for lowered vehicles? I have seen something you made for Mike Kojima's Z32, looked pretty good.
Will
Will
#94
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kevins350z
Can we have a group buy for the front/rear endlink since we have such a huge demand here?
#96
Registered User
iTrader: (3)
Join Date: Sep 2003
Location: SoCal
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
SPL End Links Order List (The NEW ones made specifically for the 350z)
1. z-u-later (front & rear end links)
2. USN HM 350Z (F & R)
3.deviljon (front and rear)
4. axolotol81 (Front and Rear)
5. jmckuhen (front & rear)
6. Grommit (F & R)
7.
8.
9.
10.
1. z-u-later (front & rear end links)
2. USN HM 350Z (F & R)
3.deviljon (front and rear)
4. axolotol81 (Front and Rear)
5. jmckuhen (front & rear)
6. Grommit (F & R)
7.
8.
9.
10.
#97
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Resolute
???? Do you say this due to the split lower link?
Will
Will
#98
Registered User
iTrader: (43)
Join Date: Jun 2006
Location: Lone Star State
Posts: 2,757
Likes: 0
Received 0 Likes
on
0 Posts
SPL End Links Order List
1. z-u-later (front & rear end links)
2. USN HM 350Z (F & R)
3.deviljon (front and rear)
4. axolotol81 (Front and Rear)
5. jmckuhen (front & rear)
6. NoLimit (front & rear)
7. SpoilsofWar (front & rear)
8. JZ350
9. aalzuhair
10. Grommit (F & R)
11.
12.
13.
14.
15.
1. z-u-later (front & rear end links)
2. USN HM 350Z (F & R)
3.deviljon (front and rear)
4. axolotol81 (Front and Rear)
5. jmckuhen (front & rear)
6. NoLimit (front & rear)
7. SpoilsofWar (front & rear)
8. JZ350
9. aalzuhair
10. Grommit (F & R)
11.
12.
13.
14.
15.
#99
Registered User
iTrader: (36)
Join Date: Sep 2006
Location: CA Bay Area
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
1. z-u-later (front & rear end links)
2. USN HM 350Z (F & R)
3.deviljon (front and rear)
4. axolotol81 (Front and Rear)
5. jmckuhen (front & rear)
6. NoLimit (front & rear)
7. SpoilsofWar (front & rear)
8. JZ350
9. aalzuhair
10. Grommit (F & R)
11. Kevins350z (F&R)
12.
13.
14.
15.
2. USN HM 350Z (F & R)
3.deviljon (front and rear)
4. axolotol81 (Front and Rear)
5. jmckuhen (front & rear)
6. NoLimit (front & rear)
7. SpoilsofWar (front & rear)
8. JZ350
9. aalzuhair
10. Grommit (F & R)
11. Kevins350z (F&R)
12.
13.
14.
15.