Does any one know if you can buy the brembo track edition brakes and install them on a non-brembo Z. Would there be modification involved? Thanks

 

buy everything(calipers,rotors,pads,brake lines,bolts,fluid)
remove old brakes
trim the dust shields
install new harware

its not a bad install...

 

Yes you can install the OEM Brembos on another Z. I don't recall seeing a DIY on it, but if you search this forum (Brakes & Suspension), you might find some related posts. If I remember correctly, you'll need different brake lines too.

 

thanks

 

The harder part of the install is whether you want to replace the stock dust shields or just cut them.

 

Indeed I just did this install on my car - got used brembo's and resurfaced rotors front and rear , ss lines and bolts (rear only - fronts are same bolts).

Before:



After:

 

good info

 

Where can I pick up a set of gold brembos?

 

Check the classifieds here. I've seen a set go here and there, for pretty cheap too. Good bargain IMO.

 

https://my350z.com/forum/brakes-and-suspension-diy/266223-diy-for-stock-non-brembo-to-stock-brembo-brakes.html