Do you know how much i should torque the bolts to with 350evo sways? i have an inchpounds and foot pounds torque wrench.

 

TIGHT!!! I would say atleast 80LbsFt.

 

I'd also say no less than 80, no more than 90.

 

Yeah very tight. I didn't do mine with a tq wrench but I did it with a ratchet and a pipe for extra strength.

What settings do you guys have the 350evo bars at? Mine are on full stiff front and full stiff rear. The car feels very controlled through turns, no oversteer. I haven't gotten a chance to really push it to it's limits yet because my coilovers are too low.

 

I have a sedan on Z and coupe springs and the sway settings are M/M.

 

Definitely do it tight, some ppl even use some lock-tite on it. After my install, I tracked the car and one of the bolts came right off. It is probably less of an issue for street driving.


I ran Soft/Med, and the car rotated quite nicely. Now I'm trying Med/Med...gonna try Med/Hard next.