DIY Rear Spring Mount Cut Mod + Tein S.Tech

Reply Subscribe

Thread Tools

Search this Thread

Mar 27, 2008 | 02:24 PM

#41

THE_SCHROED

New Member

iTrader: (21)

Joined: Jan 2007

Posts: 2,821

Likes: 0

From: Alabama

Any of yall do this with the Tanabe NF210 springs? I'm lookin for an idea of what mine will look like.

Mar 27, 2008 | 02:30 PM

#42

NGZ

Registered User

iTrader: (1)

Joined: Jan 2007

Posts: 1,604

Likes: 0

From: Bay Area

Quote:

Originally Posted by Jeff92se

Must be just me but it looks like the rear lower valance is lower in the rear vs the front. The fender gaps match but is the rear of the car actually lower than the fronts?

http://img340.imageshack.us/img340/5570/dsc00293ii7.jpg

Could be just the shadow?

Mar 28, 2008 | 11:49 PM

#43

black06z

Thread Starter

Registered User

iTrader: (1)

Joined: May 2006

Posts: 7,166

Likes: 0

From: West Coast/Pacific Rim

That pic was on a slope. Its pretty leveled out on a flat surface. The car handles fine since I had the alignment awhile back. The mod is perfect for those who don't wanna spend the money for coilovers or another set of springs.

Mar 29, 2008 | 12:07 AM

#44

Nexx

New Member

iTrader: (41)

Joined: Jun 2005

Posts: 13,654

Likes: 8

From: DFW

i recommend this mod for s-tech and hotchkis owner who regret not going with a more aggressive spring. people with tanabe or any other spring that already lowers the car 1.5" or more, should know what to expect if you decide to do this mod and drop another half inch or so.