Those are MSRP prices listed. You could easily get a Stoptech kit for a little more than what Megan retails for. I'm assuming you can get Megan's for under $3k likewise.

 

^Tell me where you can get a Full kit 6/4 pot and 2 piece rotor stoptech BBK close to the price of the MSRP of Megan?

 

There are some a few posts down on this thread...

https://my350z.com/forum/showthread....+Racing+brakes

 

Thanks again! Last question, can you give more details on this kit such as 6/4 pot, size of the rotor 14" or 13" and part # of this exact kit Scott using on his z. I think I just found my next purchase.

 

http://www.meganracing.com/products/...=536&catid=116

 

how big of a wheel do these require???

 

I would say 18s to be safe, but I am sure there are 17s that will fit, and some that will not. People have fit some 17s over the 14" Stoptechs and Rotoras before.

 

Now i could be wrong, BUT the pic's on the sight are of a G35 and i do believe those are stock rims, so i'm thinking 18's, BUt i could be wrong

 

Hmmmm, maybe we should get a Group Buy going for Megan Racing BBK?

 

We know they fit over 18" stock 06+ Z rims. HOWEVER, I believe there was clearance issues with the spokes and required a spacer. 17's should work, but the offset and spoke clearance need to be addressed.

 

FYI, I JUST got off the phone with the manager, my sponsor, and friend of Megan Racing. I got the ok from them to do a group buy on the complete Megan Racing big brake kit so, I will start a new thread on that, and link you guys to it.

 

Good, I was about to pull the trigger and get a full set from my local shop. Maybe I can get a better deal with the group buy!

 

Hurry Scott! I too am close to pulling the trigger.

 

Here you go.........

https://my350z.com/forum/showthread....48#post4799248

 

Wow, that's how more group buys should go.

 

Is "Megan" machined in the caliper or is it a sticker?

 

Sticker

 

hey just curious. when you say AP (same company as willwood?) racing bbk hardware is known to break.. what do you mean? like the rotor? or caliper parts?

 

Wow a BBK I could actually buy someday.

 

AP Racing... http://www.apracing.com/car/site.htm

The bolts I am talking about are the ones on the 2 piece rotors that hold the rotor to the hat (i.e. the black part of the rotor to the silver part).