SPC Rear Camber Arms Install HELP!
11-26-2008, 02:17 PM
#1
Registered User
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Location: New Orleans
Posts: 2,157
Likes: 0
Received 0 Likes
on
0 Posts
SPC Rear Camber Arms Install HELP!
I cant get the inside bolt off the OEM camber arm....any ideas? Do I have to drop down the sway bar or something? Please help...thanks!
11-28-2008, 02:13 PM
#3
Registered User
iTrader: (15)
Join Date: Apr 2006
Location: Baltimore
Posts: 2,918
Likes: 0
Received 0 Likes
on
0 Posts
You have to figure out how to wiggle it out of there.
I had the same problem the first time (driver's side).
If you move the camber arm down while moving the bolt up, and vice versa, it should eventually slide out.
No need to remove the swaybar.
I had the same problem the first time (driver's side).
If you move the camber arm down while moving the bolt up, and vice versa, it should eventually slide out.
No need to remove the swaybar.
Thread
Thread Starter
Forum
Replies
Last Post
350Z Project X
Suspension
9
10-10-2015 09:23 AM
