NEW SPL PRO front compression rod bushings
03-04-2010, 09:24 AM
#1
NEW SPL PRO front compression rod bushings
It's going to be out!! Estimated release - Mar 31 2010 
I emailed them asking about it last year and now it's out. http://www.splparts.com/main4/parts/...tmultilink.htm
Sat, Sep 5, 2009 at 4:27 PM
Solid bushing. Will outlast the rest of the car.
Someone please sticky this so people with cars that have the bushing failure can find it easily.
I emailed them asking about it last year and now it's out. http://www.splparts.com/main4/parts/...tmultilink.htmSat, Sep 5, 2009 at 4:27 PM
Do these bushing replace the bushing in the compression rods on the 2003-2006 RWD G35? The stock compression rods bushing have been know to tear and make noise and Nissan has revised the compression rod bushings but I was wondering if the bushings in the SPL complete set replace the ones on the compression rods also. The problems with stock compression rod bushings can be found here. http://g35driver.com/forums/brakes-s...l-crap-11.html
Thank you.
Alex C
Thank you.
Alex C
Hi Alex!
These bushings replace only the lower arm bushings, they do not replace the compression rod bushings. We may have an offering for the compression rod bushings in a few months...
These bushings replace only the lower arm bushings, they do not replace the compression rod bushings. We may have an offering for the compression rod bushings in a few months...
Someone please sticky this so people with cars that have the bushing failure can find it easily.
Last edited by Andrei; 03-04-2010 at 10:05 AM.
03-04-2010, 09:27 AM
#2
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 28 Likes
on
19 Posts
lol..........i was in austin about two weeks ago and actually held it in my hands....
Kual laughed at me when i dropped one of the cone spacers 2 seconds later....lol..
I too am waiting for it.......he told me i had first dibs on the first one! so get in line buddy! im first!
lol..
-J
Kual laughed at me when i dropped one of the cone spacers 2 seconds later....lol..
I too am waiting for it.......he told me i had first dibs on the first one! so get in line buddy! im first!
lol..
-J
03-08-2010, 05:39 AM
#4
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Would be cool to see Kuah response to his previous post about their findings on replaceing this bush.
https://my350z.com/forum/7485201-post16.html
https://my350z.com/forum/7485201-post16.html
Trending Topics
04-01-2010, 02:10 PM
#12
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
We are sorry about the delay, the reason for the delay is that we are waiting on a 1" size Endura style bearing (with the slot loaded injection molded liner) that is being manufactured specifically for this application. The Endura style bearings currently only go upto 3/4", and we had to order a large number of these 1" bearings just so the manufacturer would be willing to tool up to make this new bearing. We can use a regular teflon lined 1" bearing but it would be more for a race only application as the liner can "pound out" if dirt gets on the bearing. If there is demand for this race only design right now, I can order up some bearings and have these bushings ready to ship in about 1 week.
04-03-2010, 07:01 AM
#14
Vendor - Former Vendor
iTrader: (10)
Join Date: Nov 2004
Location: Austin TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I cannot do any introductory specials because that would put us in a pricing conflict with our dealers. However this part is going to be priced VERY competitively with a street price of $157 (MSRP of $185).
05-23-2010, 03:11 PM
#18
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
No chit, i have to align my car next week and wanted them installed before my alignment. Well i guess i'll have to align again later, i still need to get a few more whiteline bushing for the rear end too.
