I'm considering installing new springs and have been researching camber kits..

I believe SPC 72265 should be suitable for our cars. I don't think you'll need camber arm adjustment for the extra 1 degree.

Anyone else have any input on this?

According to SPC website

SPC 72265 - Camber Kit (Camber ±3.00 degree Toe ±3.00 degree)
SPC 72260 - Extreme Rear Camber Kit (Camber ±4.00 degree Toe ±3.00 degree)

Stock Bolts are said to provide +/- 1.5/2.0 degrees...

Unless you're slammed I don't think you'll need the extreme kit...?


Drop 2 inches - Camber changes -3.86 degrees.
Drop 3 inches - Camber changes -3.86 degrees.


I don't believe any springs have a greater drop than 2". Which means you should only be buying the camber arms if you are running coilovers. That is only if you're drop is greater than 2"....

In conclusion you can save yourself some money and just buy the toe bolt kit.

Any input?

 

Read here....so far, you are very very wrong..

Suspension 101 sticky thread on top of this subforum:
https://my350z.com/forum/brakes-and-...ion-101-a.html

Ask any remaining questions there on that thread if you still have any.

/thread...
-J