I have searched and searched and found one other person with the same problem but never found the solution. Here goes: I am rebuilding a set of Brembo calipers and I have this rebuild kit: http://www.nissanraceshop.com/produc...ont-4112012u25

The dust boots for the larger piston on the front caliper are too big. Anyone ever figure out which kit will work? I have also tried a brembo rebuild kit from a different vendor and I ran into the same problem.

I found this one at Courtesy: http://www.courtesyparts.com/41000l-...4_715_806_807&

Any thoughts? Thanks!

 

Anyone? Anyone? Bueller? Bueller?