Hi guys!, I have a set of Brembo Calipers from a Porsche Cayenne and I`m building my custom Front Brake kit... but looking around for a pair of Front Rotors, I found that the FX50 rotors are bigger 14" ( 355mm ) compared to the 324" and very similar in the other measurements!!..

What do you guys think?

here are 2 images with the exact measurements of Both the 350z rotors and the FX50 rotors for comparision (not meaning I will buy this rotor Brand)

FX50


350Z

 

CZP Akebono's come with PowerSlot 14" rotors... I don't see why it won't work.

 

You'll enjoy the 14" rotors. I'm running 14.1" Stop techs. They fill in the wheel barrel gap very well. Make sure your calipers clear the inside face of the wheel.




Thread moved...

 

the only regret I have when I got 14" was that I shoulda got 15", too much wheel gap if you have 19"+ rim. I like the full look

 

Will your wheel fit over a 355mm rotor? Go for it.


 

I have the stock 18" wheels... with 25mm spacers... I know kits like K-Sport use 14"...
I will order the G37 - FX50 rotors and do the work... I´ll post some pictures!