Noise in rear suspension help!!
#22
Registered User
iTrader: (15)
And BTW, replacing endlinks is an easy DIY job. It's easiest if you have both wheels off the ground (front or rear - not left or right), so the tension is released from the sway bar.
Rears - Unbolt the bottom side of the link first, and then unbolt the mounting bracket holding the top of the endlink to the chassis. You can then easily unbolt the top of the endlink. Reverse that procedure to reinstall.
Fronts - Just like the front, except you can easily access both sides of the endlinks.
Rears - Unbolt the bottom side of the link first, and then unbolt the mounting bracket holding the top of the endlink to the chassis. You can then easily unbolt the top of the endlink. Reverse that procedure to reinstall.
Fronts - Just like the front, except you can easily access both sides of the endlinks.
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM