hey guys ive had my 03 350 for about a year now, and ive just recently started sliding it. unfortunately stuff happens when going sideways at high speeds. well i went off the pavement just enough to hit a slight dip off the shoulder of the road, deep enough to call a ditch. my rear suspension did not deal with this very well. so to get to the point, what exactly would i call that piece of metal thats bent all to hell. my guess is the rear control arm or control link. i know theres hundreds of threads on just this subject but none of them i found to be sufficient for what i want to know. so to sum it all up:
what exactly do i call that link?
what all needs replaced?
whats recommended for aftermarket?
any other useful info is greatly appreciated. i know im gonna get flammed for this one and frankly i wouldnt be happy if i dont. anything to help my z get back on the track is worth posting, so please, if you deem it necessary, post it.

 

rear camber arm... keep it on a track

 

Actually, your Z saved you from a lot of more expensive damage when the rear camber arm bent. It's the weakest link when the lateral load on the rear wheel exceeds design specs. Do a search and you can find plenty of aftermarket options from companies like SPL, Kinetix and others, but unless your Z is lowered, there's no real advantage to using them. Be sure to have the entire car re-aligned after you fix this part.

 

You can find a used OEM set for cheap. Everyone is swapping them out for aftermarket arms.

 

Good work Dugan, glad to see you're still at it. Its like an early Christmas present.

 

youre not really jacking it up by the linkage are you(I guess that's one way to bend it back)? any damage to the wheel?

You'll be able to find a replacement pretty cheap for sure

 

With that one bent, usually the other 3 are bent too.

 

http://lmgtfy.com/?q=350z+rear+camber+arm

 

Floriduh

 

i probably still have my stock ones laying around somewhere if you want them for cheap just pm me.

 

the wheel is fine I just wanted to see if it would straighten out at all. it didn't...

I saw that other camber arm was slightly bent as well. what other two would you be talking about?

that was fantastic

 

Bmurray would be the way to go, closest so shipping should be cheap

 

Thanks but I'm gonna go aftermarket. Probably eBay stuff cause it's probably gonna happen again.

 

There ya go, if you don't kill someone at first, try try again. Hopefully next time you total it out ya ****** douche, keep that **** off the streets!

 

I'm sorry but you did zero search or reading. Suspension 101 thread would have identified this link for you many times.

 

in4thelolz

 

Keep your **** off the street. Hopefully you kill yourself and not an innocent family.

 

So you plan to hit things on a semi regular basis on public streets?

 

yeah and plans on ebay arms to do so with. OEM/high quality aftermarket will bend...ebay will snap. Which do you think is safer of the two?

 

I can't tell if the OP is serious or not…

you're really not going to ebay something are you? smh, penny wise, pound foolish...