I have a 2007 350Z Enthusiast Roadster with stock calipers & rotors.
I am interested in upgrading to Brembo.
I've come across a set of Brembo calipers and rotors off a 2004 G35 that appear to be in good condition.
From my research here it appears that they will fit my car but I just want to make sure that I won't have any issues.
From my research it appears that I will have to trim the rear dust shields.

Can anyone confirm that these will fit my car?

Is there anything else I need to be concerned with?

Thank You

 

350Z = G35 under the skin. If you know about the dust shields, the rest is just a direct bolt-on. Bleeding can be problematic if you let the system run dry, so think about investing in a Motive Products pressure bleeder.

 

THX

 

You're welcome. It's not a bad job. I don't like to see the rear dust shields all hacked up, though. I used an angle-grinder and just trimmed off the lip, so it looks just about original. I know no one else will see it, but I know it's there.

 

Good luck bleeding it. I did an 06 conversion and still had air in the system after bleeding it 4 times.