(OEM) FS: Brembo Fronts AS IS - issues
#1
Brembo Fronts AS IS - issues
SOLD for $100 shipped.
OEM Brembo Front calipers. AS IS. $150 shipped OBO.
I bought these used, and had them rebuilt. I had the following issues -
1. Fluid leaking from bleeder threads. I was able to minimize leaking by using SpeedBleeders with thread sealer. But during track use, they would eventually start to leak again.
2. Overheating/Pads not retracting fully. After use, if I lifted the car and tried to spin the wheels by hand, it was difficult due to pads still rubbing on calipers. I tried filing down pads, rebuilding calipers again with new seals - no help. These would overheat and fade on the track.
I am not sure what the issues are or how to repair. I would speculate that the pistons are scorched maybe preventing them from sliding properly. And that the bleeders could be re-tapped by a professional. This is just my amateur opinion.
They come with the SpeedBleeders.
OEM Brembo Front calipers. AS IS. $150 shipped OBO.
I bought these used, and had them rebuilt. I had the following issues -
1. Fluid leaking from bleeder threads. I was able to minimize leaking by using SpeedBleeders with thread sealer. But during track use, they would eventually start to leak again.
2. Overheating/Pads not retracting fully. After use, if I lifted the car and tried to spin the wheels by hand, it was difficult due to pads still rubbing on calipers. I tried filing down pads, rebuilding calipers again with new seals - no help. These would overheat and fade on the track.
I am not sure what the issues are or how to repair. I would speculate that the pistons are scorched maybe preventing them from sliding properly. And that the bleeders could be re-tapped by a professional. This is just my amateur opinion.
They come with the SpeedBleeders.
Last edited by thekinn; 03-08-2011 at 06:39 AM. Reason: sold for $100
Thread
Thread Starter
Forum
Replies
Last Post