When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I would have said the front 355mm 6pots would be suspect, but the rears look like they would fit. The only way to tell for sure is the use the template on StopTech's site.
Just buttin' in - I had the stoptech 355mm kit all the way around on my '08 and ran 18" SSR Type F wheels. It is my understanding that it depends the type of wheels, offset, spoke design, etc. but some 18" wheels will clear.
Just buttin' in - I had the stoptech 355mm kit all the way around on my '08 and ran 18" SSR Type F wheels. It is my understanding that it depends the type of wheels, offset, spoke design, etc. but some 18" wheels will clear.
Yes this is true it worked with most of my 18's
but I got a set of 18's that inside diameter gets smaller so I need
the 332mm ST40. I had called Stoptech and other vendors for over a year and have been told that the ST40 has been discontinued for awhile for the non-Brembo cars. Don't know if that held true for the Brembo equipped cars though.
Yes this is true it worked with most of my 18's
but I got a set of 18's that inside diameter gets smaller so I need
the 332mm ST40. I had called Stoptech and other vendors for over a year and have been told that the ST40 has been discontinued for awhile for the non-Brembo cars. Don't know if that held true for the Brembo equipped cars though.
Grind calipers because race car.
I had some Gran Tursimo's on an RSX that needed slight grinding.
StopTech 13" Rear BBK Red 1 month old!
Well I have sold the fronts already and have the rears still. The fronts were 355mm 6 piston setup. 
