Please enter your quarter mile times here!
Registered User
Joined: Jan 2003
Posts: 649
Likes: 0
From: Boston, MA
Re: Congrats on a good run
Originally posted by driverdog
Datonabluez, very nice numbers
What was your outside air temperature at the time of the run?
Datonabluez, very nice numbers
What was your outside air temperature at the time of the run?
Registered User
Joined: Aug 2002
Posts: 165
Likes: 0
From: Idaho
14.19 @ 98.5 2.2 60' ft.
As stock as it comes from the factory minus gas and oil and tire pressure.
Not to mention i'm at 2700' elevation and it was 98 degrees out.
Firedbird Raceway Boise, Idaho........
Next up colder temps, Straight Pipes, and Nitto 555R's.
As stock as it comes from the factory minus gas and oil and tire pressure.
Not to mention i'm at 2700' elevation and it was 98 degrees out.
Firedbird Raceway Boise, Idaho........
Next up colder temps, Straight Pipes, and Nitto 555R's.
Registered User
Joined: Mar 2003
Posts: 337
Likes: 0
From: NJ
bone stock touring
14.0 ....... 2.11 60'
@ 97.60 <--------- yeah try and figure that out...... car wasnt trapping where it should have 3500 miles
car feels noticably stronger now at 8000 miles...........hoping to get to the track soon and go 13.9 ....... or if i can really RAPE the assphalt 13.8 bone stock would be damn sexy
14.0 ....... 2.11 60'
@ 97.60 <--------- yeah try and figure that out...... car wasnt trapping where it should have 3500 miles
car feels noticably stronger now at 8000 miles...........hoping to get to the track soon and go 13.9 ....... or if i can really RAPE the assphalt 13.8 bone stock would be damn sexy
Registered User
iTrader: (1)
Joined: Feb 2003
Posts: 6,268
Likes: 0
From: Orlando with the slow cars
Re: WE DID IT
Originally posted by bluefish
She is strong as can be with over 600 hp....
Great smokey Burn out with the Slicks too
She is strong as can be with over 600 hp....
Great smokey Burn out with the Slicks too
not flaming but i doubt the car is seeing anywhere in that range for rwhp, like i said before a dyno tune with your n20 will probably net you much better results and better track times....
First time at the 1/4 mile thing..
Everybody said I did great..
This is with AEM intake, JIC Bullet Exhaust, JIC Coilovers and 19" Volk Gt-7s with Dunlop Sp9000s and no spare. half a tank of gas.
R/T 510
60' 2.237
330 6.065
1/8 9.200
MPH 78.55
1000 11.866
1/4 14.121
MPH 100.45
This was at Union Grove...
Everybody said I did great..
This is with AEM intake, JIC Bullet Exhaust, JIC Coilovers and 19" Volk Gt-7s with Dunlop Sp9000s and no spare. half a tank of gas.
R/T 510
60' 2.237
330 6.065
1/8 9.200
MPH 78.55
1000 11.866
1/4 14.121
MPH 100.45
This was at Union Grove...
Registered User
Joined: Apr 2003
Posts: 940
Likes: 0
From: Eastern PA
First time to the track... I just ROASTED the tires through first... (Any of you vets out there.. what do you launch at and what tire pressure on the crappy stock RE040's?)
87 degrees
71 percent humidity
3/4 tank of gas. Spare still in car... Stock 040's on the rear
14.312 @ 98.77
60ft 2.299
330ft 6.161
1/8mile 9.338 @ 77.51
87 degrees
71 percent humidity
3/4 tank of gas. Spare still in car... Stock 040's on the rear
14.312 @ 98.77
60ft 2.299
330ft 6.161
1/8mile 9.338 @ 77.51
Registered User
iTrader: (1)
Joined: Feb 2003
Posts: 6,268
Likes: 0
From: Orlando with the slow cars
Re: AUG 20th at Racewaypark
Originally posted by bluefish
Come out and see us try for an 11.50 run Wednesday August 20th in the evening.
lots of new goodies added...
Come out and see us try for an 11.50 run Wednesday August 20th in the evening.
lots of new goodies added...
Registered User
Joined: May 2002
Posts: 768
Likes: 0
From: Patchogue Long Island, NY
Re: Re: AUG 20th at Racewaypark
Originally posted by jackie chan
you should make a couple of motor runs for reference
you should make a couple of motor runs for reference
we ran and only had
Pulleys
Intake
Exhaust
Toyo's T1-S Street tires and 19 inch ROH wheels
we ran 13.55 et
the next time we had the header and custom fuel system with racing seats and the nitto drag radials.
13.10 et
we will see what the drag slicks can do as well as the other goodies added this week..
Registered User
iTrader: (1)
Joined: Feb 2003
Posts: 6,268
Likes: 0
From: Orlando with the slow cars
Re: Re: Re: AUG 20th at Racewaypark
Originally posted by bluefish
we plan on it. we try to run all motor a few time each outing.
we ran and only had
Pulleys
Intake
Exhaust
Toyo's T1-S Street tires and 19 inch ROH wheels
we ran 13.55 et
the next time we had the header and custom fuel system with racing seats and the nitto drag radials.
13.10 et
we will see what the drag slicks can do as well as the other goodies added this week..
we plan on it. we try to run all motor a few time each outing.
we ran and only had
Pulleys
Intake
Exhaust
Toyo's T1-S Street tires and 19 inch ROH wheels
we ran 13.55 et
the next time we had the header and custom fuel system with racing seats and the nitto drag radials.
13.10 et
we will see what the drag slicks can do as well as the other goodies added this week..
Registered User
Joined: May 2002
Posts: 768
Likes: 0
From: Patchogue Long Island, NY
Re: AUG 20th at Racewaypark
Originally posted by bluefish
Come out and see us try for an 11.50 run Wednesday August 20th in the evening.
lots of new goodies added...
Come out and see us try for an 11.50 run Wednesday August 20th in the evening.
lots of new goodies added...
Registered User
Joined: Jan 2003
Posts: 649
Likes: 0
From: Boston, MA
You got a time slip for this run?
Originally posted by Blue_350Z_Track
First time at the track with the Z, only mod is a K&N drop-in.
60'......2.023
330'....5.802
1/8.....8.874
mph....80.60
1000'..11.507
1/4.....13.715
mph....102.35
I was pretty pleased
First time at the track with the Z, only mod is a K&N drop-in.
60'......2.023
330'....5.802
1/8.....8.874
mph....80.60
1000'..11.507
1/4.....13.715
mph....102.35
I was pretty pleased
Originally posted by Blue_350Z_Track
First time at the track with the Z, only mod is a K&N drop-in.
60'......2.023
330'....5.802
1/8.....8.874
mph....80.60
1000'..11.507
1/4.....13.715
mph....102.35
I was pretty pleased
First time at the track with the Z, only mod is a K&N drop-in.
60'......2.023
330'....5.802
1/8.....8.874
mph....80.60
1000'..11.507
1/4.....13.715
mph....102.35
I was pretty pleased
Registered User
Joined: May 2003
Posts: 3,502
Likes: 0
From: queens
Originally posted by Blue_350Z_Track
First time at the track with the Z, only mod is a K&N drop-in.
60'......2.023
330'....5.802
1/8.....8.874
mph....80.60
1000'..11.507
1/4.....13.715
mph....102.35
I was pretty pleased
First time at the track with the Z, only mod is a K&N drop-in.
60'......2.023
330'....5.802
1/8.....8.874
mph....80.60
1000'..11.507
1/4.....13.715
mph....102.35
I was pretty pleased
Here's my best run and the mods I had at the time.
60' - 1.992
330' - 5.710
1/8 - 8.725
MPH - 82.47
1000' - 11.306
1/4 - 13.488
MPH - 103.92
Time Slip
Mods:
Injen CAI
Borla Headers
Random Tech Cats
Borla Dual Exhaust
UR Crank Pulley
Heavy stock touring rims
Stock tires
60' - 1.992
330' - 5.710
1/8 - 8.725
MPH - 82.47
1000' - 11.306
1/4 - 13.488
MPH - 103.92
Time Slip
Mods:
Injen CAI
Borla Headers
Random Tech Cats
Borla Dual Exhaust
UR Crank Pulley
Heavy stock touring rims
Stock tires
Last edited by 350Z_Redline; Feb 3, 2004 at 07:23 PM.