Anybody running a 28in tire?
#23
Thread Starter
Joined: Oct 2002
Posts: 7,303
Likes: 1
From: West suburbs of Chi-town
The gears are nice and long now. Took it out yesterday when it was about 43 degrees outside and with 32lbs in the tires I can launch it pretty hard and spin a little in first and get a tiny chirp in second. I can't wait to get them to the track with 20psi in them and heat them up really good. Hopefully I can cut some low 1.6 to high 1.5s.
Last edited by BriGuyMax; 10-15-2009 at 07:31 AM.
#27
Awesome pic. I wish I still had my Weld Draglites + Hoosier D05 combo.
#29
I need to check if they have a 28" DR for a 16" rim!
My car isnt really driveable on the street right now, but Id take it to the track for a quick pass or two just in time to break it for winter.
My car isnt really driveable on the street right now, but Id take it to the track for a quick pass or two just in time to break it for winter.
#31
3794R P295/50R16 28X11.50R16 27.7"
ET Street Radial II
http://www.mickeythompsontires.com/s...StreetRadialII
#32
Thread Starter
Joined: Oct 2002
Posts: 7,303
Likes: 1
From: West suburbs of Chi-town
i am also on brembo with my 16's rx7 rims 26" 255 but was looking at these
3794R P295/50R16 28X11.50R16 27.7"
ET Street Radial II
http://www.mickeythompsontires.com/s...StreetRadialII
3794R P295/50R16 28X11.50R16 27.7"
ET Street Radial II
http://www.mickeythompsontires.com/s...StreetRadialII
#34
#35
Thread Starter
Joined: Oct 2002
Posts: 7,303
Likes: 1
From: West suburbs of Chi-town
I will help immensely. I always though I was going to lose control of my car going down the 1/4 with bias plys on the back (It would sway back and fourth pretty good). These radials are nice and stable.
#37
Thread Starter
Joined: Oct 2002
Posts: 7,303
Likes: 1
From: West suburbs of Chi-town
#38
Would love to get some info on your front set up. I already have 15x8 with et streets for the rear but didn't know I could fit skinnies on the front. What wheel size, tire size, offset ect. Thanks
#39
Cool, i didn't think they would fit with the rx7 rim offset......think i was right cause those 255 already close on rubbing inside with my 25mm spacers.