Turbo 4.8 Swap
#1
Turbo 4.8 Swap
Havent updated here is awhile and I've been though some ups and downs with my car.
We are trying to get the new setup working. Still have a hard time spooling this 88mm but its getting better every time out.
Set up is as follows:
03 350Z , 3580LB race weight
All stock suspension and rear end
gen 4 4.8 with stock 862 heads
BTR stage 2 turbo cam ( not the 4.8 cam)
LS6 intake
On3 88mm
75 shot to help spool and these passes were at 22lbs of boost
Foot brake
PTC built th350 and a FTI converter
Here is the 1st pass , didn't get slips for the last 2 passes as something under the car was hitting the beams , thats why it red lit me the last 2 passes
We are trying to get the new setup working. Still have a hard time spooling this 88mm but its getting better every time out.
Set up is as follows:
03 350Z , 3580LB race weight
All stock suspension and rear end
gen 4 4.8 with stock 862 heads
BTR stage 2 turbo cam ( not the 4.8 cam)
LS6 intake
On3 88mm
75 shot to help spool and these passes were at 22lbs of boost
Foot brake
PTC built th350 and a FTI converter
Here is the 1st pass , didn't get slips for the last 2 passes as something under the car was hitting the beams , thats why it red lit me the last 2 passes
The following users liked this post:
OldManZ350 (02-15-2019)
#2
350Z-holic
iTrader: (13)
Nice - do you have a build thread somewhere?
Thread
Thread Starter
Forum
Replies
Last Post
Jack Mallis
NA Builds
15
08-15-2016 04:54 PM
Fairlady_z33
Engine
15
07-24-2011 07:46 AM
gjoey66
Forced Induction
35
11-15-2007 06:47 AM