13.52 @ 101 at Boise, ID
Just got back from the track today... I had to work so a buddy of mine threw his slicks on my car and ran it for me... Slicks were 24.5 x 8.5 x 15 M&H's....
slip goes .
R/T -.014
60' 1.759
330 5.509
1/8 8.615
mph 79.66
1000 11.285
ET 13.52
MPH 100.99
Hopefully we'll be making a trip to Woodburn soon to run some Sea Level times so i can lay down a 12.9 timeslip for you guys..
The corrected factor on this run is a 13.0 @ 104.
Mods are listed in the sig... Car dyno'd 253hp and 246tq with the stock exhaust, NO injen on the car on the dyno everything else was on but i had the stock exhaust on the car cause i was going to sell the exhaust but now i put it back on.
slip goes .
R/T -.014
60' 1.759
330 5.509
1/8 8.615
mph 79.66
1000 11.285
ET 13.52
MPH 100.99
Hopefully we'll be making a trip to Woodburn soon to run some Sea Level times so i can lay down a 12.9 timeslip for you guys..
The corrected factor on this run is a 13.0 @ 104.
Mods are listed in the sig... Car dyno'd 253hp and 246tq with the stock exhaust, NO injen on the car on the dyno everything else was on but i had the stock exhaust on the car cause i was going to sell the exhaust but now i put it back on.
Originally posted by sith
Just got back from the track today... I had to work so a buddy of mine threw his slicks on my car and ran it for me... Slicks were 24.5 x 8.5 x 15 M&H's....
slip goes .
R/T -.014
60' 1.759
330 5.509
1/8 8.615
mph 79.66
1000 11.285
ET 13.52
MPH 100.99
Hopefully we'll be making a trip to Woodburn soon to run some Sea Level times so i can lay down a 12.9 timeslip for you guys..
The corrected factor on this run is a 13.0 @ 104.
Mods are listed in the sig... Car dyno'd 253hp and 246tq with the stock exhaust, NO injen on the car on the dyno everything else was on but i had the stock exhaust on the car cause i was going to sell the exhaust but now i put it back on.
Just got back from the track today... I had to work so a buddy of mine threw his slicks on my car and ran it for me... Slicks were 24.5 x 8.5 x 15 M&H's....
slip goes .
R/T -.014
60' 1.759
330 5.509
1/8 8.615
mph 79.66
1000 11.285
ET 13.52
MPH 100.99
Hopefully we'll be making a trip to Woodburn soon to run some Sea Level times so i can lay down a 12.9 timeslip for you guys..
The corrected factor on this run is a 13.0 @ 104.
Mods are listed in the sig... Car dyno'd 253hp and 246tq with the stock exhaust, NO injen on the car on the dyno everything else was on but i had the stock exhaust on the car cause i was going to sell the exhaust but now i put it back on.
Registered User
iTrader: (1)
Joined: Feb 2003
Posts: 6,268
Likes: 0
From: Orlando with the slow cars
Originally posted by basam350z
Jackie, I don't know if anyone really gives a rip about your "stang". This is a 350z forum.
But nice time.
Jackie, I don't know if anyone really gives a rip about your "stang". This is a 350z forum.
But nice time.
since you are no one i guess your statement is true. but most of the other guys here have a mutual interest in cars like i do, and take a small interest in my car like i do thiers.
Trending Topics
Thanks,
Oh i will run them... I'm taking it out the 8th on the slicks again this time with me driving and were going to prep the car more and try to get it cool, since it will be at night
it will run a 13.4 with me behind the wheel that night!!!
then were all going to Woodburn on the 18th of June so i can run a 12.9
Oh i will run them... I'm taking it out the 8th on the slicks again this time with me driving and were going to prep the car more and try to get it cool, since it will be at night
it will run a 13.4 with me behind the wheel that night!!!
then were all going to Woodburn on the 18th of June so i can run a 12.9
Originally posted by basam350z
Jackie, I don't know if anyone really gives a rip about your "stang". This is a 350z forum.
But nice time.
Jackie, I don't know if anyone really gives a rip about your "stang". This is a 350z forum.
But nice time.
Originally posted by sith
Thanks,
Oh i will run them... I'm taking it out the 8th on the slicks again this time with me driving and were going to prep the car more and try to get it cool, since it will be at night
it will run a 13.4 with me behind the wheel that night!!!
then were all going to Woodburn on the 18th of June so i can run a 12.9
Thanks,
Oh i will run them... I'm taking it out the 8th on the slicks again this time with me driving and were going to prep the car more and try to get it cool, since it will be at night
it will run a 13.4 with me behind the wheel that night!!!
then were all going to Woodburn on the 18th of June so i can run a 12.9
we will see.... But everyone that goes from our track to another track on the westcoast has lost atleast .5 tenths in the 1/4.... Same setup and same driving..
What people don't realize is that this car has got so much more into it... People just don't know how to drive it to it's FULL potential. the car is rated at 14.1 in the 1/4????
i did 14.1 HERE at 2700' ft of elevation..
Look at my MPH.. On most Z's with my mods its right around 104.... Mine is low cause i'm driving the **** out of it!!! Notice the 60 ft..
What people don't realize is that this car has got so much more into it... People just don't know how to drive it to it's FULL potential. the car is rated at 14.1 in the 1/4????
i did 14.1 HERE at 2700' ft of elevation..
Look at my MPH.. On most Z's with my mods its right around 104.... Mine is low cause i'm driving the **** out of it!!! Notice the 60 ft..
Were going out Saturday night... nice cool night.. I'm giong to prep the car better.
IF i cut a 13.4? i will hit 12.9 at sea level i guarantee. I know this car can do it. I don't see how some people haven't yet...
Time will tell.. If anyone is around Woodburn... June 19th is Sport Compact Challenge at Woodburn!! A bunch of us will be there
IF i cut a 13.4? i will hit 12.9 at sea level i guarantee. I know this car can do it. I don't see how some people haven't yet...
Time will tell.. If anyone is around Woodburn... June 19th is Sport Compact Challenge at Woodburn!! A bunch of us will be there
Thread
Thread Starter
Forum
Replies
Last Post
WayneTN
Engine, Drivetrain & Forced-Induction (DIY)
79
May 27, 2015 10:37 PM
zland
Audio & Video
11
Jan 24, 2003 09:54 AM





in my stang
