I need a rear camber kit.. just put on my 19's and dropped on sportlines.. i see HUGE camber in the rear... would an alignment fix this?... i should go and get a camber kit riiiiite?

Anywayz.. Post up whatever you have!.. or tell me where i can find one CHEAP... i dont care about the brand

 

https://my350z.com/forum/south-east-marketplace/350433-fs-intense-power-rear-camber-arms.html

damnit, just realized you're in Canada. Eh, still worth a shot.

 

You should be able to bring back the rears to almost Spec its the fronts that have no movement

 

Shabir,
yes an alignment will help.

What size are your rears? 9.5 or 10.5?

if 9.5, you wont need camber arms at all. As Mapleleaf said, you should be able to get it back to almost stock specs.

You can pick up an spc rear camber kit. Its fairly inexpensive.

C

 

So i dont need a camber kit??... just get an alignment?.. my rears are 9.5 in the rear with a 275/35/19 tire... they are sitting like //\\... and i want them to sit like [][]... so just an alignment ur saying will fix that??

 

The rear camber on the Z should look like the first / / just not on such a angle the alignment should bring it back within spec

 

You should be fine with an alignment.

 

So why do people get camber kits then if a simple alignment can fix ur camber angle??

 

I run a 10.5 rear and I needed to buy the SPC rear camber arms to get my alignment back as close to OEM spec as i could..

 

camber arms are needed if you slam your ride....anything more than about 1" drop requires camber arms to bring the car back to oem alignment specs...the oem arms only have so much adjustment.

 

the sportlines are 1.2"... thats what i have... it looks more than 1.2.. so if i just go and get an alignment i could just starighten that shyt out without worryin about a camber kit?... wow.. this stuff is so confuzin sometimes!

 

Ah yes!..

You will prob need a camber kit.. Im at about 1.2"

 

Kinetix has a front/ rear camber kit........http://www.kinetixracing.com/index.a...ATS&Category=1