Lapping day @ Toronto Motorsprots Park (TMP) SUNDAY
I'm very proud of myslef and I feel like billy badass.
New Pb 1:24.72 despite traffic.
passed a lot of cool cars like a GT3, M3, R35 GTR, New aston martin
- yeah i know, no one cares
New Pb 1:24.72 despite traffic.
passed a lot of cool cars like a GT3, M3, R35 GTR, New aston martin
- yeah i know, no one cares
Thread Starter
New Member
iTrader: (24)
Joined: Jun 2009
Posts: 1,456
Likes: 1
From: Ontario, Canada
Thats cool! I didnt go... You must have been driving all out? Those cars you mentioned are all reputable.
What suspension, brakes, and tires do you rock? Stock vlsd?
What suspension, brakes, and tires do you rock? Stock vlsd?
Stock suspension. Eibach Prokit springs. SPC rear camber arms.
Stock 03 non brembo calipers. rbf 600 fluid. parts source rotors (destroyed one of them with a seized caliper)
stop tech street performance pads this time. Stainless steel lines.
Tires are square Hankook RS3
Stock 03 non brembo calipers. rbf 600 fluid. parts source rotors (destroyed one of them with a seized caliper)
stop tech street performance pads this time. Stainless steel lines.
Tires are square Hankook RS3
Trending Topics
Thread Starter
New Member
iTrader: (24)
Joined: Jun 2009
Posts: 1,456
Likes: 1
From: Ontario, Canada
Haha thats cool. You going to get a front bbk? It's all the car really needs I hear. I have non-brem's with Hawk pads, ss lines, motul.
I want to get a vented hood, and oil coolers for next year.
I want to get a vented hood, and oil coolers for next year.
I'd suggest that you'll need an upgrade on the rear brakes, too, for any tracking.
On my set-up I was running BrakePros pillar vane vented rotors (1 pc), BrakePros pads and SS lines and after a single track day the rear pads disintegrated and took the rotors with them.
Knowing that the stock brakes are covered in WEAK SAUCE I also took it easy on the brakes all day and didn't do much late, hard braking.
This was at the Mosport full track - a place that, while fast, is supposedly easy on brakes. Stock 2003 brakes = fail. Single piston fronts for God's sake!
On my set-up I was running BrakePros pillar vane vented rotors (1 pc), BrakePros pads and SS lines and after a single track day the rear pads disintegrated and took the rotors with them.
Knowing that the stock brakes are covered in WEAK SAUCE I also took it easy on the brakes all day and didn't do much late, hard braking.
This was at the Mosport full track - a place that, while fast, is supposedly easy on brakes. Stock 2003 brakes = fail. Single piston fronts for God's sake!
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM




