so do WE NEED TO SEND THEM THE TC AND VB OR JUST THE VB?

 

If your doing the valve body and converter you need to send them both.

Thanks Glen

 

Is everybody sending their VB and torque converters

 

So, we won't receive our TC or VB back for 2 weeks?

 

Fairlady z33- You should consider posting the GB on G35Driver forum as well. Im sure theres few FI 5AT G's that are interested in the SGP VB upgrade.

 

ill talk to mark and ask him he told me 10 people or something close but ill ask him if its ok formore people.

 

Yep in two weeks they will be finished. Sincerly i thought it was going to take atleast 1 month or so to get them all done im sending mines tommorow.

 

Guys is it hard to remove the VB or is it easy.

What i heard is that
1 open the bottom of the tranny
2 collect the tranny fluid3
3 take a couple of bolts
4 unplug the VB

Am i correct or am i missing something

 

Its not hard but you can not remove all the screws to the valve body. I sent you a picture of what ones to take out to make the unit come down. Without the picture you wont know what screws to take out.

 

And r my steps correct. The ones that you numbered r the ones that have to go out.

 

Yes you drain the tranny fluid remove the transmission pan. Then remove valve body screws that are numbered, but be careful the unit is heavier than it seems. Make sure you unplug the connections before you remove all the screws. I hope this helps you out. If anyone else needs the picture pm me.

Thanks Glen

 

im going to go for it

BTW for how long do i drain the fluid

 

If any one need instructions I have a PDF file from STILLEN that explain how to do it (with pictures) PM me were you want me to send the PDF.

CESAR

 

http://www.stillen.com/product_files/453033_453035.pdf

 

No offense but the organization of this GB is a little off.

Are we supposed to send the whole VB, or the same parts lists as the Stillen instructions? I assume we just send it to SGP care of? Is SGP going to post in here? I'm all for this, but to reduce downtime for some of us does it make sense for everyone to send them in at once?

 

Yea it would reduce down time but everyone wants to get it done ASAP nobody is going to say o ill wait guys go ahead we all want it. Plus if you r sending 10 to 11 VB 14 days is not bad at all it takes 6 to 7 days for one so do the math. I think the downtime is ok for the amount been sent if you want u can wait n send it when nobody else has sent theirs.

Mark even told me start sending them.


Remember to get the GB we need ten people.

 

can anyone give me the phon of mark and the address to send the VB.

THANKS

 

Has anyone sent their VB or is going to send this week.

 

today iam going to call mark and send it today.

 

A little off topic but going with the AT tranny... Does anyone know if you can change the direction of the triptronic shifter??? It would be soooo much better to be able to pull down for an upshift...