SR350Z pictures!!!!
07-17-2005 | 03:46 PM
#81
Looks good. Motor sits a little high though.
My car makes 402rwhp and is under 2600lbs with no cutting of the car at all. Still run front and rear bumpers, stock doors, dashboard, front glass, headlights, tail lights, all that stuff. CF hatch and hood.
My car makes 402rwhp and is under 2600lbs with no cutting of the car at all. Still run front and rear bumpers, stock doors, dashboard, front glass, headlights, tail lights, all that stuff. CF hatch and hood.
07-17-2005 | 05:13 PM
#82
Registered User
Joined: Sep 2003
Posts: 790
Likes: 0
From: Del Rio, Texas
Originally Posted by ALong
Illphill,
all the power too you, good luck with the project. Before you pull the VQ35 try to get dyno numbers and maybe some acceleration runs, would be an interesting comparison too figures with the SR20.
I would be impressed if you put a SR20 into a 240Z, now that would be cool.
all the power too you, good luck with the project. Before you pull the VQ35 try to get dyno numbers and maybe some acceleration runs, would be an interesting comparison too figures with the SR20.
I would be impressed if you put a SR20 into a 240Z, now that would be cool.
07-20-2005 | 04:41 PM
#83
Registered User
Joined: Jan 2003
Posts: 4,453
Likes: 0
From: Riverside, California
anybody that thinks the sr20 can brake 400(and thats pushing it) on the stock bottom end has never owned one...
4G63 can do about 600hp, its called IRON BLOCK
cant wait to see a new SR z at drift events, bring it out to a drift day or something, ill let you drive my Z if you let me drive yours ;D
4G63 can do about 600hp, its called IRON BLOCK
cant wait to see a new SR z at drift events, bring it out to a drift day or something, ill let you drive my Z if you let me drive yours ;D
Thread
Thread Starter
Forum
Replies
Last Post
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM
