Adding gauges
Adding gauges
I want to add some gauges and have questions:
1) I'm thinking at least water and oil temperature. It seems to me that there must be sensors already for the EGU and the temperature information is already on the CAN network. Do any of the gauges connect to the CAN bus instead of using their own sensors?
2) How do I mount gauges so that they look good with a frost interior? All of the A pillar mounts seem to be in black only.
3) Oil & water temp, maybe A/F ratio.... any other ideas?
Tx
1) I'm thinking at least water and oil temperature. It seems to me that there must be sensors already for the EGU and the temperature information is already on the CAN network. Do any of the gauges connect to the CAN bus instead of using their own sensors?
2) How do I mount gauges so that they look good with a frost interior? All of the A pillar mounts seem to be in black only.
3) Oil & water temp, maybe A/F ratio.... any other ideas?
Tx
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
Gruppe-S
Body Interior
13
May 16, 2016 10:42 PM