C-Foam
Thread Starter
Administrator
iTrader: (25)
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
Has anyone ever used this stuff in their intake manifold? It's suppose to clean your injection system out really good. I've been thinking about using it in my Eclipse/144k miles.
Thread Starter
Administrator
iTrader: (25)
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
i used it in my 85 volvo 740 with 180kmi. worked like a champ -- calmed the idle right down and helped the engine rev faster 
did a liter of chinese water torture before i put a full can through the intake manifold (just hook up a spare vacuum line and alternate dipping the tube into your bottle one second on, one second off, until it's all gone)
one thing it will definitely point out is if your exhaust gaskets are going
and watch out for the james bond esque smokescreens!

did a liter of chinese water torture before i put a full can through the intake manifold (just hook up a spare vacuum line and alternate dipping the tube into your bottle one second on, one second off, until it's all gone)
one thing it will definitely point out is if your exhaust gaskets are going
and watch out for the james bond esque smokescreens!
Thread Starter
Administrator
iTrader: (25)
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
Originally Posted by Machupo
i used it in my 85 volvo 740 with 180kmi. worked like a champ -- calmed the idle right down and helped the engine rev faster 
did a liter of chinese water torture before i put a full can through the intake manifold (just hook up a spare vacuum line and alternate dipping the tube into your bottle one second on, one second off, until it's all gone)
one thing it will definitely point out is if your exhaust gaskets are going
and watch out for the james bond esque smokescreens!

did a liter of chinese water torture before i put a full can through the intake manifold (just hook up a spare vacuum line and alternate dipping the tube into your bottle one second on, one second off, until it's all gone)
one thing it will definitely point out is if your exhaust gaskets are going
and watch out for the james bond esque smokescreens!Trending Topics
Thread Starter
Administrator
iTrader: (25)
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
Originally Posted by Wazowski
Depends on how much "seafoam" you used. It looks really cool by the way.
smoke lasts the duration of the chinese water torture / seafoam application + 1-3 minutes... the best thing to do is to do the seafoam and then do a WOT run on a busy interstate
makes for good fun!
makes for good fun!
Thread Starter
Administrator
iTrader: (25)
Joined: Jun 2005
Posts: 58,609
Likes: 2,747
From: Down Under & Dirty
I used that stuff this weekend. Fed about 1/3 pint(6oz) through my PVC vacuum line using a transmission fluid pump. Let the car sit 5mins then restarted. I only saw a couple puffs of smoke while feeding the seafoam into the manifold. When I restarted, there was nothing.
The end results are better though. The rough idle has calmed down and my acceleration is smoother. I'm happy.
The end results are better though. The rough idle has calmed down and my acceleration is smoother. I'm happy.




