Notices
Engine & Drivetrain VQ Power and Delivery

Why is cable so long on Grounding Kit ?

Thread Tools
 
Search this Thread
 
Old Dec 26, 2002 | 05:27 PM
  #1  
MR RIZK's Avatar
MR RIZK
Thread Starter
New Member
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,225
Likes: 1
From: Australia
Default Why is cable so long on Grounding Kit ?

Stupid question.

I noticed that in most kits the cable that runs from the battery to the left side of the motor (looking from front of car) is quite long, why does it have to be so long? I understand that there must be some slack for engine movement but I believe that this is a bit excessive.

Isn't the shorther the better ?

Does the length of each earth cable need to be similar ?

See attached image
Attached Thumbnails Why is cable so long on Grounding Kit ?-6_connectionpoints.jpg  
Reply
Old Dec 30, 2002 | 03:18 PM
  #2  
insaneamine's Avatar
insaneamine
Inventor
Z-Xtreme.com
iTrader: (1)
 
Joined: Oct 2002
Posts: 354
Likes: 0
From: Z-Xtreme.com
Cool Cable Lengths

These pictures are from my original install. The measured length came from the Nissan Grounding kit.

You have very good eyes!

I have since re-measured the lenghts for a more "tailored" installation.

If you will also notice... the pictures from the red installation, the cables are much shorter.

The shorter the cable - the less resistance!
Reply
Old Dec 30, 2002 | 03:26 PM
  #3  
insaneamine's Avatar
insaneamine
Inventor
Z-Xtreme.com
iTrader: (1)
 
Joined: Oct 2002
Posts: 354
Likes: 0
From: Z-Xtreme.com
Default Also,

If after looking at the red installation, the cable still seems a tad bit too long...

Consider this, not every wants to rout the cable through the rubber grommet to the battery compartment. The extra length is provided for alternative routing, just further to the left, under the "weather stripping" to the battery compartment.
Reply
Old Dec 31, 2002 | 10:24 PM
  #4  
MR RIZK's Avatar
MR RIZK
Thread Starter
New Member
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,225
Likes: 1
From: Australia
Default

Cool..

Thanks for the update. It is a nice looking kit with the heat shrinked ends that stay parallel with the thickness of the cable.

Hope you sell enough of them to pay for some of the future mods
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sales@czp
Engine
33
Sep 23, 2019 03:30 PM
HoBrahYouStink
Media Share
32
Jun 24, 2016 10:58 PM
2ndchanceZ
Engine
1
Oct 26, 2015 08:03 PM
hulkout
Tuning
1
Sep 30, 2015 12:33 PM




All times are GMT -8. The time now is 03:23 AM.