350Evo 3.9 installed impression
Originally Posted by JisNis
Im digging this thread up from the grave. But How many people have installed and the Central FD? How many miles on it? and whats your opinion?
The gears went in with a Quaife LSD, and you definitely want a serious LSD with the short rear. No idea what my engine is making (just headers, spacer and pop), but it's a whole lot easier to spin the tires now; come Spring, I'm exchanging my Pilot Sport A/S for summer rubber. Without the Quaife, I'd probably like the gears a lot less than I do.
Originally Posted by wong hun xun
Guys, please learn to state facts rather than hearsay.
OEM gear topspeed: 185.6
3.9 gear topspeed: 167.6
OEM gear topspeed: 185.6
3.9 gear topspeed: 167.6
Originally Posted by wong hun xun
Guys, please learn to state facts rather than hearsay.
OEM gear topspeed: 185.6
3.9 gear topspeed: 167.6
OEM gear topspeed: 185.6
3.9 gear topspeed: 167.6
Originally Posted by liquidsilver350
Ok ...a Question I Dont Think Anyone Has Asked!!! With The 3.9 Rear Does It Require Shifting To Third 0-60?...and If So Wouldnt That Hurt The 0-60 Times?
Originally Posted by titanjc
Isn't the Central20 FD about 1/2 the cost of the 350EVO? What's a ballpark figure for an install?
The 350evo gears are hands down too expensive. Saying you get what you pay for is crap. Look at gears for other cars and you will see.
Go with the Central 20 if you can find a set. You need the same additionaly parts for the install regardless of which you buy. Both are only a ring and pinion.
Go with the Central 20 if you can find a set. You need the same additionaly parts for the install regardless of which you buy. Both are only a ring and pinion.
Thread Starter
Joined: Feb 2005
Posts: 5,106
Likes: 0
From: Cincinnati OH
YEP this is why i buy chinese knock of shoes...You take some company that puts all the R&D then sells them one for a personal car and a few mos later the company deut their own identical ring a pinion.. wy 3.9 and not 4.10 or 3.8 or 3.7... just because they used some one elses idea and with that lack of production cost the sale cost is much lower....
I suppose its business but i am going to always support a cincy local business for their ingenuity.
I suppose its business but i am going to always support a cincy local business for their ingenuity.
Originally Posted by MI 35th
YEP this is why i buy chinese knock of shoes...You take some company that puts all the R&D then sells them one for a personal car and a few mos later the company deut their own identical ring a pinion.. wy 3.9 and not 4.10 or 3.8 or 3.7... just because they used some one elses idea and with that lack of production cost the sale cost is much lower....
I suppose its business but i am going to always support a cincy local business for their ingenuity.
I suppose its business but i am going to always support a cincy local business for their ingenuity.
+1



