Just dropped off my car at Scott Performance
So your going to set your redline to 8000rpm with stock rods, rods bolts and valves?
And the mechanic said he'll give you a good deal on some forgies if your motor blows?
And the mechanic said he'll give you a good deal on some forgies if your motor blows?
Last edited by mchapman; Mar 6, 2006 at 12:37 AM.
Originally Posted by ZON
Rev limiter is still stock. Springs and rev limiter would be next on my list.
Seat of the pant's is night and day compared to stock. You will have stock like idle, but you will have more power everywhere. These cam's make power to 9800 rpm. I can tell with mine that when I hit stock rev limiter it doesn't want to be over yet. It's like the top end is just getting started when I'm forced to shift because of the limiter. But the top end doesn't just turn on like a light switch because you still have all the extra power in the low/mid too. It's like the torque just runs into the hp up top. Your going to have a blast!!
Seat of the pant's is night and day compared to stock. You will have stock like idle, but you will have more power everywhere. These cam's make power to 9800 rpm. I can tell with mine that when I hit stock rev limiter it doesn't want to be over yet. It's like the top end is just getting started when I'm forced to shift because of the limiter. But the top end doesn't just turn on like a light switch because you still have all the extra power in the low/mid too. It's like the torque just runs into the hp up top. Your going to have a blast!!
awesome...where are you guys located? How much are they charging for the cams?
Originally Posted by mofoz
you should get crawford headers.
https://my350z.com/forum/showthread.php?t=176089
Registered User
Joined: Apr 2005
Posts: 2,059
Likes: 0
From: CALI
Originally Posted by chichi506
damn, delayed AGAIN! till wednesday! forgot to ship the ecu to technosquare to get reflashed. oh well, better late than never i guess....
I don't get to see her for 3 to 4 weeks....
Originally Posted by kamikaZ
awesome...where are you guys located? How much are they charging for the cams?
We're all the way over here on the west coast, bro. Check this web site and call him www.scottperformance.us . Maybe he will hook you up.
saw your car yesterday when I went to SP to drop my deposit for my built block. Chris was just putting everything back in. I saw your engine apart. Looks sweet. You'll love it!!
Have fun, stay safe!!
Have fun, stay safe!!
Originally Posted by ZON
Just to unlock the rev limiter. Then Ted can put the limit wherever he want to thru the Unichip.
so the unichip doesnt bump up the rev limit??? I thought it would be able to do that for 900
crossing my fingers for a unblown vq......
