Details from Cosworth(Camshafts)
Originally Posted by rednezz
I promised not to release the info on these cams since they are not available just yet to everyone. I can tell you they have more lift than the most common cams available. These cams are not really made for streetability and are really made for topend only. They should work well with my Cosworth heads if the heads flow as Cosworth says.
SGP or Scotts
Here's a couple of other cams available that I never see mentioned.
http://www.briancrower.com/makes/nissan/vq35de.shtml
A few other goodies there also, including a stroker kit.
http://www.briancrower.com/makes/nissan/vq35de.shtml
A few other goodies there also, including a stroker kit.
Cosworth will send an email to us, and their distributors once the cams are available. RIght now, I know the tri-metal bearings have an ETA of July26th, but nothing on the cams or crate motors yet. I'd prefer that they take their time, as they dont want to product a me-too product. There are plenty of good cam options out there, and hopefully the Cosworth cams will deliver even better results.
Thread Starter
Registered User
iTrader: (55)
Joined: Nov 2004
Posts: 5,276
Likes: 0
From: ORLANDO, FL
Originally Posted by rednezz
I promised not to release the info on these cams since they are not available just yet to everyone. I can tell you they have more lift than the most common cams available. These cams are not really made for streetability and are really made for topend only. They should work well with my Cosworth heads if the heads flow as Cosworth says.
At least say who the manufacturer or develpoment company is.
Originally Posted by Zexy
Haha well if you don't have much to say about them then don't post.
At least say who the manufacturer or develpoment company is.
At least say who the manufacturer or develpoment company is.
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
Oct 29, 2020 07:44 PM
