Notices
Engine & Drivetrain VQ Power and Delivery

Car won't start when engine is warm.

Thread Tools
 
Search this Thread
 
Old Dec 18, 2006 | 09:04 AM
  #1  
RunyonAve's Avatar
RunyonAve
Thread Starter
Registered User
iTrader: (2)
 
Joined: Nov 2006
Posts: 138
Likes: 1
From: Placentia, Orange County, CA
Default Car won't start when engine is warm.

Please excuse the x-post.

Car is an auto 04.5. Car has never done this before until saturday. Saturday i went down to fast intentions to get my true dual exhuast put on and when they we're finished we took it out for a spin and came back and parked it. Went inside, did the payment thing, came back out to leave and when i turned the key over it turned over but almost instantly the rpms dropped to zero and the car shut off. Started again but this time i gave it a little gas and it caught and i drove home. Parked it at home for about 5 hours and went to get back in and she started right up no problem. Drove for 30 mins, ran a quick errand, got back in and it did the same thing. I've proven that it only happens when warm but i'm still not sure what the cause would be. Is this a simple computer tuning problem or something worse?

Summary: Car won't start when warm unless i give it a little gas when turning the key over. Starts right up with no problems when engine is cold. Any ideas?
Reply
Old Dec 18, 2006 | 09:17 AM
  #2  
Old School's Avatar
Old School
Shift_Boost
Premier Member
15 Year Member
iTrader: (28)
 
Joined: Dec 2005
Posts: 10,740
Likes: 25
From: On a forum dedicated to Boost
Default

Sounds like fast intentions is gonna make a couple more bucks.
Reply
Old Dec 18, 2006 | 09:25 AM
  #3  
blasian's Avatar
blasian
New Member
iTrader: (29)
 
Joined: Apr 2005
Posts: 33,731
Likes: 1
From: Get out my way pimpin, LA
Default

You probably need to reset the ECU with the Nissan instructions. When I installed my Pop Charger, I reset it by disconnecting my battery and my car would not start when it was warmed up. It would just die right after it cranked. I believe if you reset the ECU the proper way, it will relearn how to idle. If you don't reset, it will eventually learn to idle... well I know mine did but it took a few days.
Reply
Old Dec 18, 2006 | 09:33 AM
  #4  
RunyonAve's Avatar
RunyonAve
Thread Starter
Registered User
iTrader: (2)
 
Joined: Nov 2006
Posts: 138
Likes: 1
From: Placentia, Orange County, CA
Default

Sounds like fast intentions is gonna make a couple more bucks.
I always get a kick out of the insanely vague posts.

You probably need to reset the ECU with the Nissan instructions. When I installed my Pop Charger, I reset it by disconnecting my battery and my car would not start when it was warmed up. It would just die right after it cranked. I believe if you reset the ECU the proper way, it will relearn how to idle. If you don't reset, it will eventually learn to idle... well I know mine did but it took a few days.
yea it was only reset by disconnecting the battery. Maybe i'll just give it a few days and see what happens.
Reply
Old Dec 18, 2006 | 09:41 AM
  #5  
blasian's Avatar
blasian
New Member
iTrader: (29)
 
Joined: Apr 2005
Posts: 33,731
Likes: 1
From: Get out my way pimpin, LA
Default

Originally Posted by RunyonAve
I always get a kick out of the insanely vague posts.



yea it was only reset by disconnecting the battery. Maybe i'll just give it a few days and see what happens.
If you would like to fix it yourself:
http://www.technosquareinc.com/350reset.htm
Reply
Old Dec 18, 2006 | 09:43 AM
  #6  
Motormouth's Avatar
Motormouth
Banned
iTrader: (44)
 
Joined: Aug 2005
Posts: 20,190
Likes: 2
From: not here
Default

sure it isn't an exhuast leak? I know a vacuum leak will cause the engine to die. what about the O2 sensors, possible they knocked it or broke them?
Reply
Old Dec 18, 2006 | 10:18 AM
  #7  
jtabraham's Avatar
jtabraham
Registered User
iTrader: (46)
 
Joined: Jul 2006
Posts: 2,930
Likes: 1
From: Atlanta
Default

It sounds like a servo motor (IAC) is not opening far enough during warm start. As others have said, try the full ECU reset first.
Reply
Old Dec 18, 2006 | 11:38 AM
  #8  
Old School's Avatar
Old School
Shift_Boost
Premier Member
15 Year Member
iTrader: (28)
 
Joined: Dec 2005
Posts: 10,740
Likes: 25
From: On a forum dedicated to Boost
Default

Originally Posted by RunyonAve
I always get a kick out of the insanely vague posts.
Just giving you a hard time bro....not too sure how to fix your problem....never had a problem like that with my 03. If everyone says reset the ECU, I'd try that first as its free.
Reply
Old Dec 18, 2006 | 02:22 PM
  #9  
Sharif@Forged's Avatar
Sharif@Forged
Sponsor
Forged Performance
iTrader: (92)
 
Joined: Dec 2003
Posts: 13,733
Likes: 1
From: Marietta, GA
Default

Has the car ever been ECU tuned or UTEC tuned? Stock fuel system and injectors I presume?
Reply
Old Dec 18, 2006 | 02:31 PM
  #10  
stein's Avatar
stein
Registered User
iTrader: (3)
 
Joined: Jan 2006
Posts: 5,856
Likes: 0
From: Virginia Beach, VA
Default

Originally Posted by blasian
If you would like to fix it yourself:
http://www.technosquareinc.com/350reset.htm
Thanks for the link

Yeah, I would try this^ first. Is the check engine light on?
Reply
Old Dec 18, 2006 | 06:39 PM
  #11  
RunyonAve's Avatar
RunyonAve
Thread Starter
Registered User
iTrader: (2)
 
Joined: Nov 2006
Posts: 138
Likes: 1
From: Placentia, Orange County, CA
Default

No check engine light. ECU hasn't been tune and you're correct on the fuel system and injectors.
Reply
Old Dec 18, 2006 | 07:09 PM
  #12  
rocks's Avatar
rocks
Registered User
iTrader: (1)
 
Joined: Jul 2006
Posts: 1,396
Likes: 2
From: hobbs nm
Default

Maybe on o2 sensor in unhooked. check that. i have a broken header i have to weld tomorow and my car didnt die.
Reply
Old Dec 18, 2006 | 08:08 PM
  #13  
blasian's Avatar
blasian
New Member
iTrader: (29)
 
Joined: Apr 2005
Posts: 33,731
Likes: 1
From: Get out my way pimpin, LA
Default

Originally Posted by RunyonAve
No check engine light. ECU hasn't been tune and you're correct on the fuel system and injectors.
Same here, I didn't have a check engine light or anything. Hell, it was just the Pop Charger
Reply
Old Dec 29, 2006 | 09:07 PM
  #14  
Tru350z's Avatar
Tru350z
Registered User
iTrader: (13)
 
Joined: Sep 2004
Posts: 172
Likes: 0
From: IN
Default

I have a same problem after header installed. I do not have SES light and reset it with proper method. No exhaust leak.
Is there any other way to fix this problem???
Thanks.
Reply
Old Dec 30, 2006 | 05:47 AM
  #15  
nismology1's Avatar
nismology1
Registered User
 
Joined: Jul 2004
Posts: 332
Likes: 1
From: South Fla.
Default

Originally Posted by jtabraham
It sounds like a servo motor (IAC) is not opening far enough during warm start. As others have said, try the full ECU reset first.
The 350z has no seperate IAC assembly.
Reply
Old Dec 30, 2006 | 06:26 AM
  #16  
350Zenophile's Avatar
350Zenophile
New Member
20 Year Member
iTrader: (20)
 
Joined: Aug 2004
Posts: 4,350
Likes: 4
From: USA
Default

It sounds like they swapped your car with an RX-8 when you weren't looking.
Reply
Old Dec 30, 2006 | 09:55 AM
  #17  
telcom's Avatar
telcom
Registered User
 
Joined: Mar 2006
Posts: 19
Likes: 0
From: kuwait
Default

check the coolent temp sensor when the engine is hot it shuld be 80 dig Centiegrade and above.

if the sensor gets faulty then it will show you 40dig C.

and this will give you hard starting while the engine is hot.

i hope this can help


i hope this can help
Reply
Old Dec 30, 2006 | 09:46 PM
  #18  
Roger V's Avatar
Roger V
Registered User
iTrader: (4)
 
Joined: Apr 2005
Posts: 2,661
Likes: 1
From: So.Cal
Default

That happened to my car. Gave it a little gas and it hasn't done it since. Would love some input.
Reply
Old Dec 30, 2006 | 10:08 PM
  #19  
Tru350z's Avatar
Tru350z
Registered User
iTrader: (13)
 
Joined: Sep 2004
Posts: 172
Likes: 0
From: IN
Default

where is the coolant temp sensor located at?
Reply
Old Apr 23, 2007 | 06:53 AM
  #20  
live2themaxuk's Avatar
live2themaxuk
Registered User
iTrader: (2)
 
Joined: Sep 2006
Posts: 251
Likes: 0
From: UK
Default

Originally Posted by Tru350z
where is the coolant temp sensor located at?

I would like to res-erect this dead post as i am having the same problem and it has yet been fixed using all of technosquares totorials?


Ive reset it using pedal method and the other things. . . .should i just leave it now to 'learn', despite its dieing all the time?

This is the same ECU that 'cancels out' any mods you do to it, but cant even idle after its brain gets reset??? WTF
Reply



All times are GMT -8. The time now is 09:08 PM.